Blomberg WM 87120 NBL00 Time display, Anti-Crease, Time delay, Changing the delay time

decreased.

• Anti-Crease

With this function ( d), drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level.

•Use this function for delicate laundries that crease easily.

C Whenever you select this auxiliary function, load your washer with half of the maximum laundry specified in the program table.

Time display

The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”.

Time delay

With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes.

1.Open the loading door, place the laundry inside and fill detergent drawer.

2.Set the washing program, temperature, spin speed and, if required, select the auxiliary functions.

3.Press “Time delaying” buttons “+” and “-” to set your desired time delay. The Time delaying symbol will flash.

4.Press “Start/Pause/Cancel” button.

Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light

up.

The “:” in the middle of the displayed time delay will start to flash.

•More laundry may be loaded or taken out during the time delay period. At

the end of the time delay countdown process, time delaying symbol fades and the washing starts as the program duration is displayed.

Changing the delay time

If you want to change the time during the countdown:

1.Press “Start/Pause/Cancel” button.

“ : “ in the middle of the screen will stop flashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade.

2.Press “Time delaying” buttons “+” or

“-” to set your desired time delay.

3.Press “Start/Pause/Cancel” button.

The Time delaying symbol will light up. The Standby symbol will fade. The Start symbol will light up.

4.The “:” in the middle of the displayed time delay will start to flash.

Canceling the time delay

If you want to cancel the time delay countdown and start the program immediately:

1.Press “Start/Pause/Cancel” button

The “:” in the middle of the displayed time delay will stop flashing.

2.Start symbol will fade. The standby symbol and the time delaying symbol will flash.

3.Press time delaying button “-” to decrease the desired time delay.

Program duration after 30 minutes shall be displayed.

4.Press Start/Pause/Cancel Button to start the program.

24

EN