Blomberg WM 87120 NBL00 installation instructions Laundry in the machine. The laundry

Page 39

 

 

 

 

 

There may be an imbalance of

 

 

laundry in the machine. The laundry

 

 

in the drum may be tangled up

 

Intermediate spins may be

too much. Laundry should be

 

rearranged and re-spun. No spinning

 

skipped.

 

is performed when the laundry is

 

 

 

 

not evenly distributed in the drum

 

 

to prevent any damage to the

 

 

appliance and to its environment.

 

The amount and storage

Store detergents in a cool and dry

 

conditions of the detergent used

place. Do not keep them under high

Rinsing performance is

might not be appropriate.

temperatures.

 

 

poor.

 

 

Not using HE detergent

Use HE detergent.

 

 

 

 

 

Using excessive amount of

Reduce the amount of detergent.

 

detergent

 

 

 

 

 

 

Drain hose may be folded.

Check the drain hose and straighten

 

if necessary.

 

 

 

 

 

 

 

Clean the drain pump filter (See

 

Drain pump filter or drain itself

“User maintenance instructions” ). If

 

may be clogged.

the house drain pipes are clogged,

 

 

call a plumber for assistance.

 

Detergent (powder) may have

Dry the dispenser drawer before

 

been put in wet dispenser

 

putting in powder detergent.

 

drawer.

 

 

 

Detergent (powder) may have

Store detergent in a cool and dry

Detergent or softener

place. Do not keep them under high

gotten damp.

temperatures.

residue in the dispenser/

 

 

Dilute the softener by pouring some

Too much water

Softener may be too dense or

warm water on it (dilute up to max

remains in the softener

concentrated.

fill line).

compartment.

 

Water pressure might be low.

 

 

 

 

 

 

 

Detergent might be mixed with

Softener/bleach should not come

 

into contact with detergent when

 

the bleach/softener.

 

being added.

 

 

 

Feet might require adjustment.

Adjust the washer feet (See

 

“Levelling the Washer”).

 

 

 

 

 

 

Shipping bolts might not have

Remove the shipping bolts (See

 

“Removing Transport/Shipping

 

been removed.

 

Bolts”).

 

 

Washer vibrates, shakes

There may be a small amount of

Add more laundry to the drum for

even load distribution next time you

laundry in the drum.

or makes too much

operate the washer.

 

noise.

 

 

 

The drum may be overloaded or

Reduce the amount of laundry in the

 

the clothes may be distributed

drum or balance the load by hand

 

unevenly.

next time you operate the washer.

 

 

 

 

The appliance might be touching

Ensure that nothing touches the

 

a solid surface.

washer.

 

 

 

Strange noise in the

This is not a problem. Lapping

 

sound is normal at the end of the

It is not harmful to your washer.

drain pump.

drain operation.

 

 

 

 

 

 

39

EN

Image 39
Contents Front-Loading Automatic Washer WM 87120 NBL00 Explanation of symbols Please read this guide firstThis guide will… Table of Contents Overview Your WasherSpecifications Important Safety Instructions Page Page Installation Instructions Right Location InstallationInstallation Clearances Removing packaging reinforcement Allowable Clearances for Undercounter InstallationAllowable Clearances for Closet Installation Stacked InstallationLevelling the washer Electrical ConnectionGrounding Instructions Water Supply Connection Power supply and circuitDrainage Installation ChecklistPacking Disposal TransportationDisposal Information Appliance DisposalBefore the first use Operating InstructionsFirst Use Laundry TipsLoading the washer Preparing the laundryDetergent Quantity Detergent UseLiquid Chlorine Bleach Compartment Water ConsumptionDisplay symbols Selecting a Program and Operating Your WasherControl panel Additional programs Turning the washer onProgram cycle selection Wash CyclesTemperature selection Special programsSpin Speed selection Program Cycle Selection Table Extra Rinse Auxiliary functionsAuxiliary Function Selection Buttons SoakTime display Time delayChanging the delay time Canceling the time delayChanging the selections after the program has started Switching the washer to standby modeStarting the Program Progress of programEnding the program through canceling Child-proof lockEnd of program Adding more laundry Canceling a programPreparation StartingRe-spinning the laundry If you want to discharge the water without spinningCleaning the outer cabinet and control panel User maintenance instructionsCleaning detergent dispenser Cleaning the door sealCleaning the drain pump filter Cleaning the water inlet strainersDescaling the washer Troubleshooting LCD Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Start/Pause/Cancel button for a short Warranty Statement for the Blomberg Clothes Washers HOW to GET Service