Blomberg WM 87120 NBL00 installation instructions Automatic spin correction

Page 35

 

 

The automatic spin correction

 

 

system might have been activated

 

 

due to the unbalanced distribution of

 

 

the laundry in the drum.

 

 

 

It continuously spins.

There may be an imbalance of

The laundry in the drum may be

Remaining time does not

tangled up too much. Laundry

load in the drum.

count down.

should be rearranged and re-spun.

 

 

 

 

 

 

No spinning is performed when the

 

 

laundry is not evenly distributed in

 

 

the drum to prevent any damage to

 

 

the appliance and to its environment.

 

 

 

 

 

Use the recommended amount of

 

Using excessive amount of

HE detergent appropriate for water

 

detergent.

hardness, soil level and amount of

 

 

laundry.

 

Not using HE detergent

Use HE detergent.

Excess foaming occurs.

 

 

Detergent may have been stored

Store detergent in a cool and dry

 

improperly.

place.

 

 

 

 

Type of material being washed

 

 

(lace items will cause excessive

Reduce the amount of detergent for

 

foam due to their meshed

lace items.

 

structure).

 

 

 

Push “Start/Pause/Cancel”

 

 

button. Mix 2 cups of water

Washer is completely full

 

with 1-2 tablespoon of fabric

of suds/Suds coming

Not using HE detergent / Using

softener and pour it into

out of dispenser during

excessive amount of detergent

detergent dispenser. Push “Start/

operation.

 

Pause/Cancel” button again.

 

 

Use proper amount of HE detergent

 

 

next time you operate the washer.

 

 

Do not unload the washer.

 

 

Operate a quick wash cycle (e.g.

 

 

Delicates, Wools) without any

Load is still too soapy /

Not using HE detergent / Using

detergent. Add 1-2 tablespoon

Washer is full of suds at

of fabric softener into main

excessive amount of detergent

the end of program.

wash compartment of detergent

 

 

 

dispenser during water intake.

 

 

Use proper amount of HE detergent

 

 

next time you operate the washer.

 

 

 

 

Unbalance detection due to 1-2

Add more laundry (e.g. a few

Load is still too wet at

small items in the drum (uneven

additional towels) to the drum and

load distribution)

start a “Spin” or “Spin&Drain” cycle.

the end of program.

 

 

 

Poor spinning results due to

 

 

not using HE detergent / using

Use proper amount of HE detergent.

 

excessive amount of detergent

 

35

EN

Image 35
Contents Front-Loading Automatic Washer WM 87120 NBL00 This guide will… Explanation of symbolsPlease read this guide first Table of Contents Overview Your WasherSpecifications Important Safety Instructions Page Page Installation Clearances Installation InstructionsRight Location Installation Removing packaging reinforcement Allowable Clearances for Undercounter InstallationAllowable Clearances for Closet Installation Stacked InstallationGrounding Instructions Levelling the washerElectrical Connection Water Supply Connection Power supply and circuitDrainage Installation ChecklistPacking Disposal TransportationDisposal Information Appliance DisposalBefore the first use Operating InstructionsFirst Use Laundry TipsLoading the washer Preparing the laundryDetergent Quantity Detergent UseLiquid Chlorine Bleach Compartment Water ConsumptionControl panel Display symbolsSelecting a Program and Operating Your Washer Additional programs Turning the washer onProgram cycle selection Wash CyclesSpin Speed selection Temperature selectionSpecial programs Program Cycle Selection Table Extra Rinse Auxiliary functionsAuxiliary Function Selection Buttons SoakTime display Time delayChanging the delay time Canceling the time delayChanging the selections after the program has started Switching the washer to standby modeStarting the Program Progress of programEnd of program Ending the program through cancelingChild-proof lock Adding more laundry Canceling a programPreparation StartingRe-spinning the laundry If you want to discharge the water without spinningCleaning the outer cabinet and control panel User maintenance instructionsCleaning detergent dispenser Cleaning the door sealCleaning the drain pump filter Cleaning the water inlet strainersDescaling the washer Troubleshooting LCD Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Start/Pause/Cancel button for a short Warranty Statement for the Blomberg Clothes Washers HOW to GET Service