Blomberg WM 87120 NBL00 Auxiliary functions, Auxiliary Function Selection Buttons, Soak

Page 23

• : Selectable

*: Automatically selected, not cancellable.

- : See program description for maximum load.

Selectable options of a wash cycle are extra rinse “R”, super wash “SW”, soak "S", rinse hold "RH" and anti crease “A”.

1.Even if there is no hot water system, hot water inlet must still be connected to another cold water faucet. Otherwise a fault will occur on water intake.

2.Programs are limited with the maximum spin speed appropriate for that particular type of load.

3.Maximum load capacities are suggested for various load types. Wash cycles of full load (Regular/ Cotton, permanent press) should be half loaded for better wash results if the laundry is heavily soiled. Half loading would also minimize wrinkling of the load.

4.Bleach may only be used in Regular/

Cotton and Permanent Press cycles.

Don’t use bleach with delicates, handwashables, wools, jeans and sports, this will lead to clothes damage.

C The auxiliary functions in the table vary according to the model of your washer.

C Water and power consumption and program duration differ from the table subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and changes in supply voltage.

C Program duration will be displayed on the screen of your washer according to your selection.

Auxiliary functions

Auxiliary Function Selection Buttons

a b c d

Depending on the program, you can select the desired auxiliary function by pressing the buttons a, b, c, d.

Select the required auxiliary functions before starting the program.

Symbol of the selected auxiliary function will light up.

Auxiliary function selection Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Cycle Selection Table”)

• Super Wash

This function increases washing times for heavily soiled items for better wash results. Washer will only take in cold water when this function is chosen. This function also increases the amount of rinse water for “Regular/Cotton” cycle.

• Soak

This function ( b) is used for heavily soiled items when you want to pre- treat them before washing. Laundry is soaked in a relatively high amount of warm water for an hour and a half approximately. You can use full load and HE “High efficiency” detergent for soaking. Use 1/3-1/2 of the recommended detergent dosage for the load amount to be soaked.

• Extra Rinse

When this function ( c) is selected, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remaining detergent on the clothes will be

23

EN

Image 23
Contents Front-Loading Automatic Washer WM 87120 NBL00 This guide will… Explanation of symbolsPlease read this guide first Table of Contents Overview Your WasherSpecifications Important Safety Instructions Page Page Installation Clearances Installation InstructionsRight Location Installation Removing packaging reinforcement Allowable Clearances for Undercounter InstallationAllowable Clearances for Closet Installation Stacked InstallationGrounding Instructions Levelling the washerElectrical Connection Water Supply Connection Power supply and circuitDrainage Installation ChecklistPacking Disposal TransportationDisposal Information Appliance DisposalBefore the first use Operating InstructionsFirst Use Laundry TipsLoading the washer Preparing the laundryDetergent Quantity Detergent UseLiquid Chlorine Bleach Compartment Water ConsumptionControl panel Display symbolsSelecting a Program and Operating Your Washer Additional programs Turning the washer onProgram cycle selection Wash CyclesSpin Speed selection Temperature selectionSpecial programs Program Cycle Selection Table Extra Rinse Auxiliary functionsAuxiliary Function Selection Buttons SoakTime display Time delayChanging the delay time Canceling the time delayChanging the selections after the program has started Switching the washer to standby modeStarting the Program Progress of programEnd of program Ending the program through cancelingChild-proof lock Adding more laundry Canceling a programPreparation StartingRe-spinning the laundry If you want to discharge the water without spinningCleaning the outer cabinet and control panel User maintenance instructionsCleaning detergent dispenser Cleaning the door sealCleaning the drain pump filter Cleaning the water inlet strainersDescaling the washer Troubleshooting LCD Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Start/Pause/Cancel button for a short Warranty Statement for the Blomberg Clothes Washers HOW to GET Service