Washer will wait until there is a | Blomberg WM 87120 NBL00 guide

		The washer will wait until there is a
		sufficient amount of water, which
	Water pressure may be low.	may lengthen the cycle time to
		avoid poor washing results due to
		insufficient water.

		Cycle time is lengthened to avoid
	Supply voltage may be low.	poor washing results when the
		supply voltage is low.

		Cycle time lengthens to heat up
	Inlet temperature of water may	the water when the inlet water is
Cycle time takes longer	Inlet temperature of water may	cold. Also, washing time can be
	be low.	cold. Also, washing time can be
	be low.	lengthened to avoid poor washing
than the time specified in		lengthened to avoid poor washing
than the time specified in		results.
the owner’s guide.		results.
the owner’s guide.
		The automatic spin correction
	There may be an imbalance of	system might have been activated
	load in the drum.	due to the unbalanced distribution of
		the laundry in the drum.

	Number of rinse cycles might	Use a proper amount of HE
	Number of rinse cycles might	detergent. Reduce the amount of
	have increased to obtain a better	detergent. Reduce the amount of
	have increased to obtain a better	detergent next time you operate the
	rinse.	detergent next time you operate the
	rinse.	washer.
		washer.

	In the case of a paused
	countdown while taking in water:	The washer will wait until there is a
	Timer will not countdown until	The washer will wait until there is a
	Timer will not countdown until	sufficient amount of water to avoid
	the washer is filled with the	sufficient amount of water to avoid
	the washer is filled with the	poor washing results due to lack
	correct amount of water. Time	poor washing results due to lack
	correct amount of water. Time	of water. Then the timer will start to
	will not count down until the	of water. Then the timer will start to
	will not count down until the	count down.
	selected temperature for the	count down.
	selected temperature for the
	program is reached
	In the case of a paused
	countdown at the heating step:
	Time will not count down until
	the selected temperature for the
	program cycle is reached.
It continuously washes.		The automatic spin correction
Remaining time does not		The automatic spin correction
Remaining time does not		system might have been activated
count down.		system might have been activated
count down.		due to the unbalanced distribution of
		due to the unbalanced distribution of
		the laundry in the drum.
	In the case of a paused
	In the case of a paused	The laundry in the drum may be
	countdown at the spinning step:	The laundry in the drum may be
	countdown at the spinning step:	tangled up too much. Laundry
	There may be an imbalance of	tangled up too much. Laundry
	There may be an imbalance of	should be rearranged and re-spun.
	laundry in the drum.	should be rearranged and re-spun.
	laundry in the drum.
		No spinning is performed when the
		laundry is not evenly distributed in
		the drum to prevent any damage to
		the appliance and to its environment.

The washer will wait until there is a