Blomberg WM 87120 NBL00 installation instructions Preparing the laundry, Loading the washer

Page 16

before or after washing to prevent dye transfer.

C Wash heavily and lightly soiled items separately.

C Lint producers (towels, linen etc) and lint collectors (easy care, permanent press) should be washed separately. Lint producers should be washed inside-out.

Preparing the laundry

Items of laundry with metal parts (e.g. underwire bras, belt buckles, metal buttons) will damage the washer. Remove metal parts of place the items in a cloth bag, pillow case, or something similar.

Remove any non-washable items and accessories from laundry before washing.

Empty pockets, remove all foreign objects (e.g. coins, pens, paper clips). If possible: Turn pockets inside out and brush.

Place small items of laundry (e.g. tights) in a cloth bag, pillow case or something similar. This can also help you to avoid searching for lost socks.

Handle curtains special care. Remove non-stainless curtain runners and lead tape. Place runners that can’t be removed in a cloth bag, pillow case or something similar.

Heavy stains should be pretreated with soapy water appropriately before washing (Do not rub or scratch the stained area). If in doubt, check with a chemist or dry-cleaner.

Use only dyes/discoloring and anti- scaling agents suitable for machine wash. Make sure to follow the instructions on the package.

A WARNING - Wash jeans, delicates, pants and sweat-shirts inside-out.

Loading the washer

Maximum load capacity depends on the fabric type of laundry, soiling amount of laundry and program cycle you wish to use.

C Do not exceed the maximum load capacity of the selected program

cycle. Washing results are adversely affected by an overloaded drum. Overloading may also cause wrinkling and abrasion on clothes.

Make sure power button is off before loading the washer. To load the washer,

Pull the door handle.

Place laundry items loosely in the drum.

Mix small and large items for an even load distribution. Large items should be loaded first. Large items should not be more than half of the total wash load.

If you put a wash bag or net which is filled with small items in the drum, put an additional wash bag to prevent load unbalance. Both wash bags should have the same amount of items to provide an even load distribution.

Before washing a single or a few items such as a pillow, a teddy bear, a single or a pair of shirts, sweat shirts etc, put some additional items in the drum for better load distribution and spinning.

Make sure that there is no clothing obstructing the door or caught between the door and rubber seal.

Push the loading door firmly shut until you hear it lock into space (especially if you load the washer with full load or big items).

In case the door is not locked,

“door” expression will appeare on the screen. In that case, door should be opened and closed again firmly.

If the door is not closed completely, the machine will not start. This is a safety precaution. The front door is locked until end of the washing program and it can not be opened untill the door icon on LCD is off following the end of the program.

Unload the washed items just after the program cycle has finished. Delay of unloading may cause wrinkling and unwanted odor on laundry.

Check to see any small metal items such as pins, coins etc left in rubber seal while unloading the washer.

16

EN

Image 16
Contents Front-Loading Automatic Washer WM 87120 NBL00 Please read this guide first Explanation of symbolsThis guide will… Table of Contents Your Washer OverviewSpecifications Important Safety Instructions Page Page Right Location Installation Installation InstructionsInstallation Clearances Allowable Clearances for Undercounter Installation Allowable Clearances for Closet InstallationStacked Installation Removing packaging reinforcementElectrical Connection Levelling the washerGrounding Instructions Power supply and circuit Water Supply ConnectionInstallation Checklist DrainageTransportation Disposal InformationAppliance Disposal Packing DisposalOperating Instructions First UseLaundry Tips Before the first usePreparing the laundry Loading the washerDetergent Use Detergent QuantityWater Consumption Liquid Chlorine Bleach CompartmentSelecting a Program and Operating Your Washer Display symbolsControl panel Turning the washer on Program cycle selectionWash Cycles Additional programsSpecial programs Temperature selectionSpin Speed selection Program Cycle Selection Table Auxiliary functions Auxiliary Function Selection ButtonsSoak Extra RinseTime delay Changing the delay timeCanceling the time delay Time displaySwitching the washer to standby mode Starting the ProgramProgress of program Changing the selections after the program has startedChild-proof lock Ending the program through cancelingEnd of program Canceling a program PreparationStarting Adding more laundryIf you want to discharge the water without spinning Re-spinning the laundryUser maintenance instructions Cleaning detergent dispenserCleaning the door seal Cleaning the outer cabinet and control panelCleaning the water inlet strainers Cleaning the drain pump filterDescaling the washer Troubleshooting LCD Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Start/Pause/Cancel button for a short Warranty Statement for the Blomberg Clothes Washers HOW to GET Service