7User maintenance instructions
A WARNING – Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock.
Cleaning detergent dispenser
Remove any powder/liquid residue buildup in the dispenser drawer. To do this;
1.Press the dotted point on the siphon of the softener compartment and pull towards yourself until the it is removed from the dispenser.
3If more than a normal amount of water and softener/bleach mixture starts to gather in the dispenser compartments, dispenser must be cleaned.
2.Wash the dispenser drawer, liquid chlorine bleach container and siphon of softener under running warm water in a sink etc. Wear protective gloves or use an appropriate brush or sponge to avoid touching the detergent residues in the drawer when cleaning.
3.Replace the drawer into its housing after cleaning. Check if the siphon and container are in their original locations.
Cleaning the door seal
Be sure to check the rubber door seal after unloading your washer. Pull the seal back to search for any foreign objects. Residual metal objects such as pins and coins may form rust stains on rubber seal, and cause the seal to leak.
Wipe the stained areas with soapy water using a damp cloth. Then wipe with a dry cloth properly. Do not use an abrasive scrubbing agent when cleaning
rubber seal.
Cleaning the drum
Check the wash drum for any foreign objects after unloading your washer. Residual metal objects such as pins and coins may form rust stains on drum surface and your clothes. Do not use abrasive materials while cleaning the inner surface of the drum. Use soapy water with a damp cloth to wipe the inner surface, then dry it and leave the door open to let inside dry properly.
Sanitary cycle with extra rinse option should be used for monthly cleaning of drum. To carry out this procedure: First be sure that the drum is empty. Add 80ml of liquid chlorine bleach
to the bleach container in the right compartment of the dispenser. Select sanitary cycle, close the door and press “start/pause” button. At the completion of cycle, leave the door open for drying of drum interior.
Monthly cleaning of the washer is necessary for removal of bacteria and mold residues and prevention of unwanted odor in wash drum.
Cleaning the outer cabinet and control panel
When necessary:
•Wipe the exterior panels of your washer with soapy water or mild detergent. Dry it with a soft cloth.
•Use only a soft and damp cloth to clean the control panel.
C Never use a sponge or scrubbing material. These will damage the
29
EN