Starting the Program
1.Press Start/Pause/Cancel button to start the program.
2.The start symbol which indicates that the program has started will light up.
3.The door locks and the door locked symbol will light up.
4.The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program has started from will light up.
Progress of program
The progress of a running cycle is shown through a number of symbols on the screen.
•At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the far right of the series of symbols indicates the step that is being carried out.
Soak
When “Soak” auxiliary function is selected, soak symbol will light up to indicate the beginning of this wash step.
Main wash
Main wash symbol will light up to indicate that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of the rinse step.
Softener
Softener symbol lights up at the beginning of softener step.
Spin
Spin symbol will light up at the beginning of the final spin, during “Drain&Spin” special programs.
•If the washer is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the washer.
Changing the selections after the program has started
The selected spin speed and program temperature fade out. An empty frame appears.
When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear.
Switching the washer to standby mode
The washer is switched to standby mode by pressing “Start/Pause/Cancel” button momentarily. The Standby symbol which indicates the washer is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out.
Selecting or canceling an auxiliary function in pause mode
Auxiliary functions can be cancelled or selected in accordance with the step the program is at.
Adding/removing laundry in pause mode
The door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door.
Door lock
The Door Locked Symbol lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out.
25
EN