STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your washer for storage as follows:
•Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the cycle without a load.
•Turn the water faucets off and disconnect the inlet hoses.
•Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside the tumbler.
•If your washer has been stored in
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.
1.Open the filter cover by pressing and pulling the handle
of the filter cover with your finger. | Filter cover |
03 CLEANING AND MAINTAINING
2.Unscrew the drain cap by turning it counterclockwise.
3.Hold the cap on the end of the drain tube and slowly pull it out about 6 in.(15 cm) and drain off all the water.
Step 1 | Step 2 |
Drain cap
4. Remove the debris filter cap.
Debris filter cap
cleaning and maintaining your washer _25