Maytag W10092822A, W10092823A - SP Washer and Components, Avoid the cost of a service call

Page 14

troubleshooting

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly

avoid the cost of a service call.

In U.S.A. www.maytag.com/help In Canada www.maytag.ca

Washer and Components

Washer displaying code messages

■■ “LF” (Washer is taking too long to fill) Check the following:

Are the hot and cold faucets turned on?

Are the water inlet hoses kinked or clogged? Are the water inlet valve screens clear? Press POWER/CANCEL to clear display.

■■ “Ld” (Washer is taking too long to drain water from the wash tub)

Check the following:

Is the drain hose kinked or clogged?

Is the drain hose installed properly? See “Connect the Drain Hose” in the Installation Instructions.

Press POWER/CANCEL to clear display.

■■ “uL” (Unbalanced Load)

If the load is unbalanced, the washer will display this code while running an imbalanced load correction routine at the end of the wash cycle and before the final spin. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, open lid and redistribute the load. Close lid and press START/PAUSE.

NOTE: For best performance, load garments in loose heaps evenly around the basket wall. Do not load above the stainless steel portion of the basket.

■■ “oL” (Over Load)

Is the washer overloaded? The washer has attempted to fill and begin the wash cycle. If the washer is overloaded, it will drain any water and detergent that was added during the fill. To correct the overload, remove several items and add detergent. Close lid and press START/PAUSE.

■■ “Sd” (Suds Detected)

Did you use regular detergent?

Regular or non-HE hand-washing detergents are not recommended for this washer.

Use only HE detergent.

Did you add too much detergent?

Always measure detergent carefully. Follow detergent manufacturer’s directions. Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

If excessive suds are detected, the washer will display this code while running a suds reduction correction routine at the end of the wash cycle. The suds reduction routine removes extra suds and assures proper rinsing of your garments. If the code remains and the wash cycle dial is flashing after the recovery routine has stopped, re-select your desired cycle using cold water. Press START/PAUSE. Do not add detergent.

■■ “lid” (Lid Opened)

Is the lid open? Close the lid to clear the display. If the lid remains open for more than 10 minutes, water in the wash tub will drain.

■■ “HC” (Cold and Hot hoses switched)

This code will appear at the end of the wash cycle to indicate that the cold and hot water inlet hoses are switched. See “Connect the Inlet Hoses” in the Installation Instructions.

■■ “dL” (Door/Lid cannot lock)

Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press POWER/CANCEL once to clear the code.

■■ “dU” (Door/Lid cannot unlock)

Is there excessive weight on the lid, such as a basket of laundry? Excessive weight will keep the lid from unlocking. Press POWER/CANCEL once to clear the code.

■■ “F##” code

Press POWER/CANCEL once to clear code. Press START/PAUSE to continue cycle. If code appears again, call for service.

■■ “Fd” (Factory Default)

This code will appear when your washer sets back to factory default.

To return all options and modifiers to Factory Default, press POWER/CANCEL, select Drain & Spin cycle, and then press Extra Rinse, Fabric Softener, Extra Rinse, Fabric Softener within 5 seconds. When done correctly, the 7-segment displays show “Fd” for 3 seconds and then unit returns to Standby Mode.

Noisy, vibrating, off-balance

■■Is the washer level? Does the washer rock when pushed against the corners?

The washer must be level. The front and rear feet must be in firm contact with the floor. Check that the locknuts are tightened. See “Level the Washer” in the Installation Instructions.

■■Is the floor flexing, sagging, or not level?

Flooring that flexes or is uneven can contribute to noise and vibration of the washer. A 34" (19 mm) piece of plywood under the washer will reduce the sounds. See “Location Requirements” in the Installation Instructions.

■■Is the load balanced?

Evenly distribute the load in the washer basket and make sure the height of the load does not exceed the top row of basket holes. See “Starting Your Washer.”

■■Do you hear clicking or other noises when the cycle changes from washing to draining or spinning?

When the drive system shifts or the washer basket settles between cycles, you may hear noises that are different from your previous washer. These are normal washer noises.

■■Is the washer gurgling or humming?

When the washer drains, the pump will make a continuous humming with periodic gurgling or surging sounds as the final amounts of water are removed. This is normal.

■■Are you washing a small load?

You will hear more splashing sounds when washing small loads. This is normal.

■■The washer basket moves while washing. This is normal.

14

Image 14
Contents Bravos Automatic U.S.A AccessoriesIf you need replacement parts CanadaWashER Safety Benefits Benefits and FeaturesFeatures Quick Start GUIDE/WASHER USE Quick Start Guide Changing cycles after pressing StartUsing the Proper Detergent Starting Your WasherCycles Additional Features ModifiersOptions Changing Cycles, Modifiers Options Normal SoundsWater Inlet Hoses Cleaning Your WasherWasher Care To winterize washer Reinstalling the washerNon-use or vacation care To use washer againWasher displaying code messages Avoid the cost of a service callWasher and Components Noisy, vibrating, off-balanceDispenser operation Washer OperationWasher leaks Washer odorClothing Care Garments damaged Load is wrinkled, twisted, or tangledStains, gray whites, dingy colors Load not rinsedMaytag Laundry Warranty This limited warranty does not coverSi vous avez besoin de pièces de rechange AccessoiresAux États-Unis Pour plus d’assistanceSécurité DE LA Laveuse Caractéristiques Avantages ET CaractéristiquesAvantages Delay Start mise en marche différée Utilisation DE LA LaveuseGuide DE Démarrage Rapide Changement des programmes après avoir appuyé sur StartMise en marche de la laveuse Utilisation du détergent appropriéUtilisation des préréglages de programme ProgrammesPréréglages de programme Heavy Duty Super servise intense Power Wash lavage avec forceSanitary with Oxi assainissement à l’oxygène Whites BlancsCaractéristiques Supplémentaires ModificateursOxi Treat Stains traitement des taches à l’oxygène Programme Clean Boost with HeaterPour annuler le mise en marche différée Fabric Softener assouplissant de tissuChangement des programmes Modificateurs, et options Sons normauxNettoyage de la laveuse Conseils DE LessivageEntretien DE LA Laveuse Tuyaux d’arrivée d’eau La laveuse affiche des messages codés DépannageLa laveuse et ses composants Bruit, vibrations, déséquilibreFonctionnement du distributeur Fonctionnement de la laveuseLa laveuse fuit Mauvaises odeurs de la laveuseTempérature de lavage/rinçage Excès de mousseRésidus ou charpie sur le linge Soin des vêtementsCharge trop mouillée La charge est froissée, entortillée, ou enchevêtréeEndommagement des vêtements La charge n’est pas rincéeGarantie DES Appareils DE Buanderie Maytag La présente garantie limitée ne couvre pasPage Page 2009

W10092823A - SP, W10092822A specifications

The Maytag W10092822A and W10092823A-SP are high-quality, essential components for homeowners seeking to enhance the functionality of their Maytag appliances. These parts are designed to improve overall performance and reliability, making them popular choices among consumers.

One of the standout features of the Maytag W10092822A and W10092823A-SP is their durability. Manufactured with high-grade materials, these components are built to withstand extensive usage over time, ensuring consistent performance in your appliances. This durability is vital in everyday kitchen tasks, ensuring that your equipment operates effectively without frequent breakdowns.

Another key characteristic of these parts is their compatibility with a wide range of Maytag appliances. This versatility allows consumers to make repairs and enhancements without the worry of purchasing multiple components. When searching for reliable replacements for your appliance, the W10092822A and W10092823A-SP offer a perfect fit, ensuring seamless integration.

The technologies incorporated in the Maytag W10092822A and W10092823A-SP are designed with efficiency in mind. They contribute to improved energy performance in appliances, promoting energy savings and reducing overall utility bills. This commitment to energy efficiency not only benefits consumers financially but also supports environmental sustainability.

Moreover, these parts are engineered for easy installation. The straightforward design means that consumers can quickly replace or upgrade components without the need for professional assistance, saving both time and money. This user-friendly approach encourages individuals to take charge of their appliance maintenance, leading to a longer lifespan for their machines.

The W10092822A and W10092823A-SP also feature innovative design elements that minimize noise and vibrations during operation. This reduction in noise levels enhances the overall user experience, making it more pleasant to use kitchen appliances which can often be a source of disturbance.

In summary, the Maytag W10092822A and W10092823A-SP parts are exemplary components that embody reliability, durability, and efficiency. With features designed for energy savings, easy installation, and compatibility with various models, these parts are an excellent investment for anyone looking to maintain or enhance their Maytag appliances. Choosing these replacement parts ensures consumers receive quality performance and longevity from their appliances, making daily tasks easier and more efficient.