Beko WDA 8514 H Installation Removing packaging reinforcement, Removing the transportation locks

Page 15

Installation

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

DANGER

¾¾The product is heavy. Remove the packaging reinforcement as illustrated.

¾¾Pay attention not to squeeze your hand under the machine during this procedure.

3.3 Removing the transportation locks

CAUTION

A¾¾ Do not remove the transportation locks before taking out the packaging reinforcement. ¾¾ Remove the transportation safety bolts before operating the washing machine!

Otherwise, the product will be damaged.

1

2

3

1Loosen all bolts with the tool supplied in the User Manual bag until they turn freely. (C)

2Remove transportation safety bolts by turning them gently.

3Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)

NOTE

C ¾¾ Keep the transportation safety bolts in a safe place to reuse when the machine needs to be moved again in the future.

¾¾ Never move the product without the transportation safety bolts properly fixed in place!

User’s Manual

15 / EN

Image 15

Contents Washer-Dryer ¾¾Warning for electric shock Please read this manual firstPreparation Important instructions for safety and environmentInstallation Your washer-dryerOperating the product Troubleshooting Maintenance and cleaningGeneral safety Electrical safetyRisk of electric shock Water will occur Important instructions for safety and environmentImportant instructions for safety and environment Intended use Childrens safety10 / EN Package information11 / EN OverviewYour washer-dryer Package Contents Product Your washer-dryer Technical specificationsAppropriate installation location InstallationRemoving the transportation locks Installation Removing packaging reinforcementInstallation Flush usage with the bench Wall when it is installed under the bench or in a cupboard16 / EN Installation Connecting water supply Pressure is higher17 / EN Tightly so that it cannot come out 90 cm Installation Connecting to the drain19 / EN Installation Adjusting the feetInstallation Electrical connection Transportation of the product20 / EN Sorting the laundry Always obey the instructions given on the garment tags21 / EN Things to be done for energy saving Preparation Preparing laundry for washingProduction. It is not harmful for the product Preparation First useCorrect load capacity Use an anti-limescale suitable for the washing machinesPreparation Loading the laundry Using detergent and softener25 / EN Preparation26 / EN Using limescale removerDrum in future washings Do not use bleaching agent and detergent by mixing them27 / EN Preparation Tips for efficient washing28 / EN Preparation Tips for efficient drying29 / EN Control panelOperating the product Display symbols Preparing the machineWash Programme selection Operating the product Washing Programmes Operating the product Cottons Eco32 / EN Synthetics Woollens33 / EN 34 / EN Xpress Super Short Shirts35 / EN Temperature selection Selecting the spin speed36 / EN 37 / EN Adjustable appears on the display38 / EN ¾¾ For dry weights of laundry, see , StepOperating the product Drying Programmes Synthetic Dry39 / EN Operating the product Washing and Drying ProgrammesKg Wash+Dry Drying clothes40 / EN Anti Allergy Wash+DryOperating the product Programme and consumption table For washing41 / EN 42 / EN Programme and consumption table For drying43 / EN Operating the product Auxiliary function selection44 / EN Drying StepsExtra Rinse Anti-Crease45 / EN Time display46 / EN Operating the product End TimeOperating the product Starting the Programme Loading door lockChanging the selections after Programme has started To activate the Child Lock Child Lock¾¾ The selected Programme starts anew Has stoppedOn the display Cancelling the ProgrammeEntering the Settings menu End of ProgrammeT T I N G S Memory Programme setting Your machine is equipped with a Standby Mode51 / EN Cleaning the detergent drawer Maintenance and cleaning¾¾ Repeat Drum Cleaning process in every 2 months ¾¾ Use an anti-limescale suitable for the washing machines53 / EN Cleaning the body and control panel Maintenance and cleaning Cleaning the air suction filterRegion of installation Maintenance and cleaning Cleaning the water intake filtersDraining remaining water and cleaning the pump filter May cause noise problemTurn the pump filter to take it out 56 / EN Maintenance and cleaning57 / EN Troubleshooting58 / EN TroubleshootingLaundry became stiff after washing 59 / EN60 / EN Water pressure is low. Check the water pressure61 / EN Page

Related manuals

Manual 2 pages 36.34 Kb