Beko WDA 8514 H user manual Troubleshooting, 58 / EN

Page 58

Troubleshooting

Washing takes longer than the specified in the manual.(*)

Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.

Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is low.

Input temperature of water might be low. >>> Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.

Number of rinses and/or amount of rinse water might have increased. >>> Machine increases the amount of rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

Programme time does not countdown. (On models with display) (*)

Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

Programme time does not countdown. (*)

There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

Machine does not switch to spinning step. (*)

There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.

The machine will not spin if water is not drained completely. >>> Check the filter and the draining hose.

Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

Washing performance is poor: Laundry turns gray. (**)

Insufficient amount of detergent was used over a long period of time. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.

Washing was made at low temperatures for a long time over a long period of time. >>> Select the proper temperature for the laundry to be washed.

Insufficient amount of detergent is used with hard waters. >>> Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.

Too much detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.

58 / EN

Washer-Dryer

 

 

Image 58
Contents Washer-Dryer Please read this manual first ¾¾Warning for electric shockYour washer-dryer Important instructions for safety and environmentInstallation PreparationOperating the product Maintenance and cleaning TroubleshootingElectrical safety General safetyRisk of electric shock Important instructions for safety and environment Water will occurImportant instructions for safety and environment Childrens safety Intended usePackage information 10 / ENOverview 11 / ENYour washer-dryer Package Contents Your washer-dryer Technical specifications ProductInstallation Appropriate installation locationInstallation Removing packaging reinforcement Removing the transportation locksWall when it is installed under the bench or in a cupboard Installation Flush usage with the bench16 / EN Pressure is higher Installation Connecting water supply17 / EN Installation Connecting to the drain Tightly so that it cannot come out 90 cmInstallation Adjusting the feet 19 / ENTransportation of the product Installation Electrical connection20 / EN Always obey the instructions given on the garment tags Sorting the laundry21 / EN Preparation Preparing laundry for washing Things to be done for energy savingUse an anti-limescale suitable for the washing machines Preparation First useCorrect load capacity Production. It is not harmful for the productUsing detergent and softener Preparation Loading the laundryPreparation 25 / ENDo not use bleaching agent and detergent by mixing them Using limescale removerDrum in future washings 26 / ENPreparation Tips for efficient washing 27 / ENPreparation Tips for efficient drying 28 / ENControl panel 29 / ENPreparing the machine Operating the product Display symbolsWash Programme selection Operating the product Washing Programmes Cottons Eco Operating the product32 / EN Woollens Synthetics33 / EN 34 / EN Shirts Xpress Super Short35 / EN Selecting the spin speed Temperature selection36 / EN Adjustable appears on the display 37 / ENSynthetic Dry ¾¾ For dry weights of laundry, see , StepOperating the product Drying Programmes 38 / ENDrying clothes Operating the product Washing and Drying ProgrammesKg Wash+Dry 39 / ENAnti Allergy Wash+Dry 40 / ENFor washing Operating the product Programme and consumption table41 / EN Programme and consumption table For drying 42 / ENOperating the product Auxiliary function selection 43 / ENAnti-Crease Drying StepsExtra Rinse 44 / ENTime display 45 / ENOperating the product End Time 46 / ENLoading door lock Operating the product Starting the ProgrammeChanging the selections after Programme has started Has stopped Child Lock¾¾ The selected Programme starts anew To activate the Child LockEnd of Programme Cancelling the ProgrammeEntering the Settings menu On the displayT T I N G S Your machine is equipped with a Standby Mode Memory Programme setting51 / EN Maintenance and cleaning Cleaning the detergent drawer¾¾ Use an anti-limescale suitable for the washing machines ¾¾ Repeat Drum Cleaning process in every 2 months53 / EN Maintenance and cleaning Cleaning the air suction filter Cleaning the body and control panelMay cause noise problem Maintenance and cleaning Cleaning the water intake filtersDraining remaining water and cleaning the pump filter Region of installationMaintenance and cleaning Turn the pump filter to take it out 56 / ENTroubleshooting 57 / ENTroubleshooting 58 / EN59 / EN Laundry became stiff after washingWater pressure is low. Check the water pressure 60 / EN61 / EN Page
Related manuals
Manual 2 pages 36.34 Kb