Beko WDA 8514 H user manual ¾¾ Repeat Drum Cleaning process in every 2 months, 53 / EN

Maintenance and cleaning

6.2 Cleaning the loading door and the drum

Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant odours and washing complaints. To avoid this, use the Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Run the programme without any laundry in the machine. Before starting the programme, put half a cup (max. 100 g) of a suitable anti-limescale powder into the main wash detergent compartment (compartment nr. "2"). If the anti-limescale is in tablet form, put only one tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

C	NOTE
	¾¾ Repeat Drum Cleaning process in every 2 months.
	¾¾ Use an anti-limescale suitable for the washing machines.

After every washing check that no foreign substance is left in the drum.

If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.

NOTE

C ¾¾ Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.

A CAUTION

¾¾ Never use sponge or scrub materials. These will damage the painted and plastic surfaces.

User’s Manual 53 / EN