Beko WDA 8514 H user manual Water pressure is low. Check the water pressure, 60 / EN

Page 60

Troubleshooting

Laundry does not smell like the softener. (**)

Detergent is put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment.

Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the dispenser with hot water.

Detergent residue in the detergent drawer. (**)

Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent.

Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.

Water pressure is low. >>> Check the water pressure.

The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>> Check the holes and clean if they are clogged.

There is a problem with the detergent drawer valves. >>> Call the Authorised Service Agent.

Detergent might be mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the dispenser with hot water.

There is detergent left on the laundry. (**)

Excessive laundry was loaded in. >>> Do not load the machine in excess.

Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.

Wrong detergent was used. >>> Select the proper detergent for the laundry to be washed.

Too much foam forms in the machine. (**)

Improper detergents for the washing machine are being used. >>> Use detergents appropriate for the washing machine.

Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.

Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot places.

Some meshed laundry such as tulle may foam too much because of their texture. >>> Use smaller amounts of detergent for this type of item.

Detergent is put in the wrong compartment. >>> Put the detergent in the correct compartment.

Softener is being taken early. >>> There may be problem in the valves or in the detergent dispenser. Call the Authorised Service Agent.

Foam is overflowing from the detergent drawer.

Too much detergent might be used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer.

Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleaches and etc), reduce the amount of detergent.

Laundry remains wet at the end of the programme. (*)

Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent.

60 / EN

Washer-Dryer

 

 

Image 60
Contents Washer-Dryer Please read this manual first ¾¾Warning for electric shockImportant instructions for safety and environment InstallationYour washer-dryer PreparationOperating the product Maintenance and cleaning TroubleshootingGeneral safety Electrical safetyRisk of electric shock Important instructions for safety and environment Water will occurImportant instructions for safety and environment Childrens safety Intended usePackage information 10 / ENOverview 11 / ENYour washer-dryer Package Contents Your washer-dryer Technical specifications ProductInstallation Appropriate installation locationInstallation Removing packaging reinforcement Removing the transportation locksInstallation Flush usage with the bench Wall when it is installed under the bench or in a cupboard16 / EN Installation Connecting water supply Pressure is higher17 / EN Installation Connecting to the drain Tightly so that it cannot come out 90 cmInstallation Adjusting the feet 19 / ENInstallation Electrical connection Transportation of the product20 / EN Sorting the laundry Always obey the instructions given on the garment tags21 / EN Preparation Preparing laundry for washing Things to be done for energy savingPreparation First use Correct load capacityUse an anti-limescale suitable for the washing machines Production. It is not harmful for the productUsing detergent and softener Preparation Loading the laundryPreparation 25 / ENUsing limescale remover Drum in future washingsDo not use bleaching agent and detergent by mixing them 26 / ENPreparation Tips for efficient washing 27 / ENPreparation Tips for efficient drying 28 / ENControl panel 29 / ENOperating the product Display symbols Preparing the machineWash Programme selection Operating the product Washing Programmes Operating the product Cottons Eco32 / EN Synthetics Woollens33 / EN 34 / EN Xpress Super Short Shirts35 / EN Temperature selection Selecting the spin speed36 / EN Adjustable appears on the display 37 / EN¾¾ For dry weights of laundry, see , Step Operating the product Drying ProgrammesSynthetic Dry 38 / ENOperating the product Washing and Drying Programmes Kg Wash+DryDrying clothes 39 / ENAnti Allergy Wash+Dry 40 / ENOperating the product Programme and consumption table For washing41 / EN Programme and consumption table For drying 42 / ENOperating the product Auxiliary function selection 43 / ENDrying Steps Extra RinseAnti-Crease 44 / ENTime display 45 / ENOperating the product End Time 46 / ENOperating the product Starting the Programme Loading door lockChanging the selections after Programme has started Child Lock ¾¾ The selected Programme starts anewHas stopped To activate the Child LockCancelling the Programme Entering the Settings menuEnd of Programme On the displayT T I N G S Memory Programme setting Your machine is equipped with a Standby Mode51 / EN Maintenance and cleaning Cleaning the detergent drawer¾¾ Repeat Drum Cleaning process in every 2 months ¾¾ Use an anti-limescale suitable for the washing machines53 / EN Maintenance and cleaning Cleaning the air suction filter Cleaning the body and control panelMaintenance and cleaning Cleaning the water intake filters Draining remaining water and cleaning the pump filterMay cause noise problem Region of installationMaintenance and cleaning Turn the pump filter to take it out 56 / ENTroubleshooting 57 / ENTroubleshooting 58 / EN59 / EN Laundry became stiff after washingWater pressure is low. Check the water pressure 60 / EN61 / EN Page
Related manuals
Manual 2 pages 36.34 Kb