Beko WDA 8514 H user manual Cancelling the Programme, End of Programme, Entering the Settings menu

Page 49

Operating the product

5.18.2 To deactivate the Child Lock:

60 oC

CHILD LOCK DISABLED

1200 88:88

Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. After the countdown as "Child Lock 3-2-1" on the display is over, "Child Lock Disabled" appears on the display.

5.19 Cancelling the Programme

60 oC

CANCEL

1200

88:88

The Programme is cancelled when the machine is turned off and on again. Press and hold On / Off button for 3 seconds. After the countdown as "Cancel 3-2-1" on the display is over, the machine turns off.

	NOTE
	¾¾ If you press On / Off button when the Child Lock is enabled, the Programme will not be
C	cancelled. You should cancel the Child Lock first. Countdown as "Pause 3-2-1" appears
	on the display.
	¾¾ If you have to open the loading door after you have cancelled the Programme, but it is
	not possible to open the loading door since the water level in the machine is above the
	loading door level, then turn the Programme Selection knob to Pump+Spin Programme
	and discharge the water in the machine.

5.20 End of Programme

“Laundry can be taken out” appears on the display when the Programme is completed.

If you do not press any button for 2 minutes, the machine will switch to pause mode. Display and all indicators are turned off. Only the frame of the Programme Selection knob remains flashing.

If you press any button or turn the Programme Selection knob when the machine is in pause mode, Programme steps that are completed will appear on the display.

5. 21 Entering the Settings menu

You can perform the following operations in Settings menu:

•Changing the language selection,

•Changing the screen brightness setting,

•Turning on and off the volume,

Press Temperature Adjustment button and Spin Speed Adjustment button simultaneously for 3 seconds to enter the Settings menu. “Select Language” menu appears on the display.

Use Temperature or Drying Adjustment buttons to navigate in menus.

User’s Manual	49 / EN

Image 49

Contents Washer-Dryer ¾¾Warning for electric shock Please read this manual firstInstallation Important instructions for safety and environmentYour washer-dryer PreparationOperating the product Troubleshooting Maintenance and cleaningElectrical safety General safetyRisk of electric shock Water will occur Important instructions for safety and environmentImportant instructions for safety and environment Intended use Childrens safety10 / EN Package information11 / EN OverviewYour washer-dryer Package Contents Product Your washer-dryer Technical specificationsAppropriate installation location InstallationRemoving the transportation locks Installation Removing packaging reinforcementWall when it is installed under the bench or in a cupboard Installation Flush usage with the bench16 / EN Pressure is higher Installation Connecting water supply17 / EN Tightly so that it cannot come out 90 cm Installation Connecting to the drain19 / EN Installation Adjusting the feetTransportation of the product Installation Electrical connection20 / EN Always obey the instructions given on the garment tags Sorting the laundry21 / EN Things to be done for energy saving Preparation Preparing laundry for washingCorrect load capacity Preparation First useUse an anti-limescale suitable for the washing machines Production. It is not harmful for the productPreparation Loading the laundry Using detergent and softener25 / EN PreparationDrum in future washings Using limescale removerDo not use bleaching agent and detergent by mixing them 26 / EN27 / EN Preparation Tips for efficient washing28 / EN Preparation Tips for efficient drying29 / EN Control panelPreparing the machine Operating the product Display symbolsWash Programme selection Operating the product Washing Programmes Cottons Eco Operating the product32 / EN Woollens Synthetics33 / EN 34 / EN Shirts Xpress Super Short35 / EN Selecting the spin speed Temperature selection36 / EN 37 / EN Adjustable appears on the displayOperating the product Drying Programmes ¾¾ For dry weights of laundry, see , StepSynthetic Dry 38 / ENKg Wash+Dry Operating the product Washing and Drying ProgrammesDrying clothes 39 / EN40 / EN Anti Allergy Wash+DryFor washing Operating the product Programme and consumption table41 / EN 42 / EN Programme and consumption table For drying43 / EN Operating the product Auxiliary function selectionExtra Rinse Drying StepsAnti-Crease 44 / EN45 / EN Time display 46 / EN Operating the product End TimeLoading door lock Operating the product Starting the ProgrammeChanging the selections after Programme has started ¾¾ The selected Programme starts anew Child LockHas stopped To activate the Child LockEntering the Settings menu Cancelling the ProgrammeEnd of Programme On the displayT T I N G S Your machine is equipped with a Standby Mode Memory Programme setting51 / EN Cleaning the detergent drawer Maintenance and cleaning¾¾ Use an anti-limescale suitable for the washing machines ¾¾ Repeat Drum Cleaning process in every 2 months53 / EN Cleaning the body and control panel Maintenance and cleaning Cleaning the air suction filterDraining remaining water and cleaning the pump filter Maintenance and cleaning Cleaning the water intake filtersMay cause noise problem Region of installationTurn the pump filter to take it out 56 / EN Maintenance and cleaning57 / EN Troubleshooting58 / EN TroubleshootingLaundry became stiff after washing 59 / EN60 / EN Water pressure is low. Check the water pressure61 / EN Page

Related manuals

Manual 2 pages 36.34 Kb