Beko WDA 8514 H user manual Preparation First use, Correct load capacity

Page 23

Preparation

4.4 First use

Before starting to use the product, make sure that all preparations are completed in accordance with the instructions in sections "Important safety and environment instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with this programme, apply the method described in 6.2.

NOTE

C	¾¾	Use an anti-limescale suitable for the washing machines.
C	¾¾ Some water might have remained in the product due to the quality control processes in
		the production. It is not harmful for the product.

4.5 Correct load capacity

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired.

The machine automatically adjusts the amount of water according to the weight of the loaded laundry.

DANGER

B ¾¾Follow the information in the “Programme and consumption table”. When overloaded, machine's washing performance will drop. Moreover, noise and vibration problems may occur. For a good drying performance, do not dry laundry more than the amounts specified.

Laundry type	Weight (g)	Laundry type	Weight (g)
Bathrobe	1200	Hand towel	100
Napkin	100	Evening gown	200
Duvet cover	700	Underclothing	100
Bed Sheet	500	Men’s overalls	600
Pillowcase	200	Men’s shirt	200
Tablecloth	250	Men’s pajamas	500
Towel	200	Blouses	100

User’s Manual	23 / EN

Image 23

Contents Washer-Dryer ¾¾Warning for electric shock Please read this manual firstPreparation Important instructions for safety and environmentInstallation Your washer-dryerOperating the product Troubleshooting Maintenance and cleaningRisk of electric shock General safetyElectrical safety Water will occur Important instructions for safety and environmentImportant instructions for safety and environment Intended use Childrens safety10 / EN Package information11 / EN OverviewYour washer-dryer Package Contents Product Your washer-dryer Technical specificationsAppropriate installation location InstallationRemoving the transportation locks Installation Removing packaging reinforcement16 / EN Installation Flush usage with the benchWall when it is installed under the bench or in a cupboard 17 / EN Installation Connecting water supplyPressure is higher Tightly so that it cannot come out 90 cm Installation Connecting to the drain19 / EN Installation Adjusting the feet20 / EN Installation Electrical connectionTransportation of the product 21 / EN Sorting the laundryAlways obey the instructions given on the garment tags Things to be done for energy saving Preparation Preparing laundry for washingProduction. It is not harmful for the product Preparation First useCorrect load capacity Use an anti-limescale suitable for the washing machinesPreparation Loading the laundry Using detergent and softener25 / EN Preparation26 / EN Using limescale removerDrum in future washings Do not use bleaching agent and detergent by mixing them27 / EN Preparation Tips for efficient washing28 / EN Preparation Tips for efficient drying29 / EN Control panelWash Programme selection Operating the product Display symbolsPreparing the machine Operating the product Washing Programmes 32 / EN Operating the productCottons Eco 33 / EN SyntheticsWoollens 34 / EN 35 / EN Xpress Super ShortShirts 36 / EN Temperature selectionSelecting the spin speed 37 / EN Adjustable appears on the display38 / EN ¾¾ For dry weights of laundry, see , StepOperating the product Drying Programmes Synthetic Dry39 / EN Operating the product Washing and Drying ProgrammesKg Wash+Dry Drying clothes40 / EN Anti Allergy Wash+Dry41 / EN Operating the product Programme and consumption tableFor washing 42 / EN Programme and consumption table For drying43 / EN Operating the product Auxiliary function selection44 / EN Drying StepsExtra Rinse Anti-Crease45 / EN Time display46 / EN Operating the product End TimeChanging the selections after Programme has started Operating the product Starting the ProgrammeLoading door lock To activate the Child Lock Child Lock¾¾ The selected Programme starts anew Has stoppedOn the display Cancelling the ProgrammeEntering the Settings menu End of ProgrammeT T I N G S 51 / EN Memory Programme settingYour machine is equipped with a Standby Mode Cleaning the detergent drawer Maintenance and cleaning53 / EN ¾¾ Repeat Drum Cleaning process in every 2 months¾¾ Use an anti-limescale suitable for the washing machines Cleaning the body and control panel Maintenance and cleaning Cleaning the air suction filterRegion of installation Maintenance and cleaning Cleaning the water intake filtersDraining remaining water and cleaning the pump filter May cause noise problemTurn the pump filter to take it out 56 / EN Maintenance and cleaning57 / EN Troubleshooting58 / EN TroubleshootingLaundry became stiff after washing 59 / EN60 / EN Water pressure is low. Check the water pressure61 / EN Page

Related manuals

Manual 2 pages 36.34 Kb