Beko WDA 8514 H Memory Programme setting, Your machine is equipped with a Standby Mode, 51 / EN

Page 51

Operating the product

S E T

3.If you want to turn up the volume, press the light button on the lower right corner of the display when "VOLUME ON" is selected. Light goes off and “Set” appears on the display.

4.If you want to turn down the volume, press the light button on the lower right corner of the display when "VOLUME OFF" is selected. Light goes off and “Off” appears on the display.

5.22 Memory Programme setting

You can create a Memory Programme by saving frequently used Programme and other settings. Use this function when you want to select quickly the same settings you use for the laundry that you wash regularly.

Memory Programme will remain at the factory set Programme until you make a new favourite Programme setting.

5.22.1To store a new Memory Programme:

1.Select the desired Programme, temperature, spin speed, soiling degree and auxiliary function.

2.Keep the Memory button pressed for 3 seconds.

3.Countdown as "Storing favourite 3-2-1" appears on the display.

C NOTE

¾¾ If storing is not successful, “Memory not saved” appears on the display.

5.22.2To select a Memory Programme:

1.Press Memory button. “Memory selected” appears on the display.

2.Programme and other settings saved as favourite appear on the display.

3.Press Start / Pause button to start your Memory Programme.

5.23 Your machine is equipped with a "Standby Mode"

In case of not starting any Programme or waiting without making any other operation when the machine is turned on by On/Off button and while it is in selection step or if no other operation is performed approximately 2 minutes after the Programme you selected has come to an end, your machine will automatically switch to energy saving mode. Brightness of indicator lights will decrease. Also, if your product is equipped with a display showing the Programme duration, this display will completely turn off. In case of rotating the Programme Selection knob or pressing any button, lights and display will restore to their previous condition. Your selections made while exiting the energy saving mode may change. Check the appropriateness of your selections before starting the Programme. Readjust if necessary. This is not a fault.

User’s Manual	51 / EN

Image 51

Contents Washer-Dryer ¾¾Warning for electric shock Please read this manual firstPreparation Important instructions for safety and environmentInstallation Your washer-dryerOperating the product Troubleshooting Maintenance and cleaningGeneral safety Electrical safetyRisk of electric shock Water will occur Important instructions for safety and environmentImportant instructions for safety and environment Intended use Childrens safety10 / EN Package information11 / EN OverviewYour washer-dryer Package Contents Product Your washer-dryer Technical specificationsAppropriate installation location InstallationRemoving the transportation locks Installation Removing packaging reinforcementInstallation Flush usage with the bench Wall when it is installed under the bench or in a cupboard16 / EN Installation Connecting water supply Pressure is higher17 / EN Tightly so that it cannot come out 90 cm Installation Connecting to the drain19 / EN Installation Adjusting the feetInstallation Electrical connection Transportation of the product20 / EN Sorting the laundry Always obey the instructions given on the garment tags21 / EN Things to be done for energy saving Preparation Preparing laundry for washingProduction. It is not harmful for the product Preparation First useCorrect load capacity Use an anti-limescale suitable for the washing machinesPreparation Loading the laundry Using detergent and softener25 / EN Preparation26 / EN Using limescale removerDrum in future washings Do not use bleaching agent and detergent by mixing them27 / EN Preparation Tips for efficient washing28 / EN Preparation Tips for efficient drying29 / EN Control panelOperating the product Display symbols Preparing the machineWash Programme selection Operating the product Washing Programmes Operating the product Cottons Eco32 / EN Synthetics Woollens33 / EN 34 / EN Xpress Super Short Shirts35 / EN Temperature selection Selecting the spin speed36 / EN 37 / EN Adjustable appears on the display38 / EN ¾¾ For dry weights of laundry, see , StepOperating the product Drying Programmes Synthetic Dry39 / EN Operating the product Washing and Drying ProgrammesKg Wash+Dry Drying clothes40 / EN Anti Allergy Wash+DryOperating the product Programme and consumption table For washing41 / EN 42 / EN Programme and consumption table For drying43 / EN Operating the product Auxiliary function selection44 / EN Drying StepsExtra Rinse Anti-Crease45 / EN Time display46 / EN Operating the product End TimeOperating the product Starting the Programme Loading door lockChanging the selections after Programme has started To activate the Child Lock Child Lock¾¾ The selected Programme starts anew Has stoppedOn the display Cancelling the ProgrammeEntering the Settings menu End of ProgrammeT T I N G S Memory Programme setting Your machine is equipped with a Standby Mode51 / EN Cleaning the detergent drawer Maintenance and cleaning¾¾ Repeat Drum Cleaning process in every 2 months ¾¾ Use an anti-limescale suitable for the washing machines53 / EN Cleaning the body and control panel Maintenance and cleaning Cleaning the air suction filterRegion of installation Maintenance and cleaning Cleaning the water intake filtersDraining remaining water and cleaning the pump filter May cause noise problemTurn the pump filter to take it out 56 / EN Maintenance and cleaning57 / EN Troubleshooting58 / EN TroubleshootingLaundry became stiff after washing 59 / EN60 / EN Water pressure is low. Check the water pressure61 / EN Page

Related manuals

Manual 2 pages 36.34 Kb