Kenmore 3405602 Route the Vent, Typical installations for left or right side exhausting

ROUTE THE VENT

Typical installations exhaust from the rear of the d .ryer.

Avoid pushing the dryer tightly against a 'wall.This can crush or kink the vent.

Use the straightest path you can, where possible. Avoid 90 ° turns.

This dryer may be converted to exhaust out the right or left side or through the

bottom. To convert the dryer, the following kits must be used.

Exhaust Kit No. 279818 (white)

Exhaust Kit No. 279819 (almond)

Exhaust Kit No. 279820 (ebony)

Follow the instructions in the kit to avoid operational and personal hazards. These kits are available at your local Sears store or Sears Service Center.

Rear exhaust installations for standard offset connections - (see pgs. 21-22)

Typical installations for left or right side exhausting

Rear exhaust installations for offset
connections with close clearances-
(see: p. 23)	Typical installations for bottom exhausting

20

G