USING WRINKLE GUARD
WRINKLE GUARD helps keep your permanent press items wrinkle free when you don't unload the dryer promptly at the end of the AUTO DRY Cycle.
If you do not open the door at the end
of the AUTO DRY Cycle, WRINKLE GUARD will tumble the clothes without
heat for about 15 seconds periodically throughout the cycle.
•On dryers with WRINKLE GUARD II, periodic tumbling will continue for about 40 minutes unless you open the dryer door.
•On dryers with WRINKLE GUARD III, periodic tumbling will continue for about 21/2hours unless you open the dryer door.
•WRINKLE GUARD III has a select- able ON/OFF option. When WRINKLE GUARD III is set at OFF, the dryer
stops after COOL DOWN and may be unloaded.
The
after each period of tumbling, unless it is off.
WRINKLEGUARD
III
OFFON
@
LINT ALERT
A properly cleaned lint screen will allow your dryer to operate at peak efficiency. This can reduce your utility bills and extend the life of your dryer.
Clean the lint screen before each load.
If you do not, your dryer may not operate properly. On some models, a continuous
whistle (lint alert) will sound if too much lint is allowed to
screen. When this happens, remove the lint screen, clean, and replace. When the dryer is restarted, the sound will stop.
3O