Selecting additional functions
You can choose from the additional functions DRYNESS, DELICATE, BUZZER and TIME (if a TIME programme has been selected). The symbols of the functions available for the se- lected programme are shown in the display.
DRYNESS 
If laundry comes out of the machine too damp after a standard drying programme, you can increase the drying result by using the DRYNESS function. Laundry becomes drier as you move from MIN to MAX.
1.Press the DRYNESS button repeatedly until the desired dryness level (MIN, MED or MAX) is shown in the display. If another
programme has been selected, AUTO flashes in the display.
If wool or silk comes out of the machine too
damp at the end of a 
WOOL or 
SILK programme, you can dry it again by restarting the appropriate programme, this time with the DRYNESS function selected and dryness
electrolux 15
level MIN, MED or MAX. In the case of a dry- ing cycle with relatively dry laundry, the length of the programme cycle displayed at the be- ginning is corrected after a while.
Caution! Make sure that by selecting the DRYNESS function, you do not over- dry your wool or silk.
DELICATE
For especially gentle drying of sensitive fab- rics with the care label and for temperature- sensitive textiles (e.g. acrylic, viscose). Pro- gramme is executed with reduced heat.
DELICATE is only suitable for use with loads of up to 3kg.
1.Press the DELICATE button. The 
DEL- ICATE symbol appears in the display.
TIME 
To select the programme duration after set- ting the 
TIME programme. You can select a programme duration from 10 minutes to 3 hours in 
COOLING programme).
1. Turn the programme knob to the 
TIMED PROGRAMME. The 
minutes is in the display
2.Press the TIME button repeatedly until the desired programme duration is
shown in the display, e.g. 
for a programme of 20 minutes.
If the programme duration is not selected, the duration is automatically set to 10 mins.
BUZZER 
See chapter "Iron AidTM Steam System" , section "Selecting additional functions -
BUZZER"
DELAY
See chapter "Iron AidTM Steam System" , section "Selecting additional functions - DE- LAY"
CHILD LOCK 
See chapter "Iron AidTM Steam System" , section "Selecting additional functions -
CHILD LOCK"
Starting a drying programme
Press the START/PAUSE button. The pro- gramme is started. The programme progress display shows drying progress. The symbols for 
DRYING and 
COOLING appear in the display one after the other. The number
of droplets in the dryness indicator gradually goes down as the drying process progress- es.