Electrolux EDI97170W user manual Cleaning heat exchanger

Page 19

light up. In order to continue the programme, the condensed water container must first be emptied.

Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.

1.Pull drawer containing condensed water container all the way out (1) and pull up the condensed water container’s drain- age pipe as far as it will go (2).

2.

1.

2.Pour out the condensed water into a ba- sin or similar container.

3.Push drainage pipe in and refit con- densed water container.

If the programme has been interrupted as a result of the condensed water container being full: Press the START/PAUSE but- ton to continue the drying cycle.

The condensed water container has a volume of approx. 4 litres. This is suffi- cient for around 7 kg of laundry which has previously been spun at 1000 revo- lutions/ minute.

4.The condensed water can be used as distilled water, e.g. for steam irons. How- ever, first filter the condensed water to

electrolux 19

remove any residues and small pieces of fluff.

Using the attached canister to filter: Pour the water out of the container straight through the filter at the top of the canis- ter.

Cleaning heat exchanger

If the HEAT EXCHANGER is displayed, the heat exchanger needs to be cleaned.

Caution! Operating when the heat exchanger is blocked with fluff can damage the dryer. This also increases energy consumption.

1.Open door.

2.Open door in plinth. To do this, press the release button on the bottom of the door aperture and open the door in the plinth to the left.

3.Clean fluff from the inside of the door and the heat exchanger front chamber. Wipe the door seal with a damp cloth.

4.Turn both lock washers inwards.

Image 19
Contents EDI97170W Iron AidImportant safety information Electrolux. Thinking of you ContentsUse InstallationPackaging material Child safetyEnvironment Old applianceProduct description Control panel What is shown in the displayBefore first use Special notes about Iron Aid Sorting and preparing laundryStarting up for the first time Sorting laundryFill water tank Iron AidTM Steam SystemOverview of Iron Aid programmes Water recirculation systemCotton Synthetics Refresh Load Select steam level LoadSelecting additional functions Starting an Iron AidTM programmeOverview of drying programmes DryingChanging a programme Iron Aid programme complete / removing laundryAdditional Dryness Starting a drying programmeDrying rack Removing laundry or loading laundry when necessaryDrying cycle complete / removing laundry Cleaning lint filters Cleaning and maintenanceClean the door seal Cleaning the water recirculation valve/ filterEmptying the condensed water container Cleaning heat exchanger What to do if Cleaning the drumClean control panel and housing Troubleshooting by yourselfAfter a IronAid pro Changing the bulb for interior lighting Technical dataConsumption values Machine settingsAppliance positioning InstallationRemoving transport safety packaging Hints for test institutesElectrical connection Drying rack unpackingFor easiest unpacking turn the rack upside down Great Britain & Ireland Standard guarantee conditions ServiceGB IE Guarantee/Customer Service Special accessories0870 5 929 European GuaranteeService and Spare Parts Exclusions136906520-01-04082008