Electrolux EDI97170W user manual Hints for test institutes, Installation, Appliance positioning

Page 24

24electrolux

Hints for test institutes

Parameters possible to checked by the Test Institutes:

Energy consumption (corrected with final humidity) during the cupboard dry cotton cycle with nominal load.

Energy consumption (corrected with final humidity) during the cupboard dry cotton cycle with half load.

Final humidity (during cupboard dry cot- ton, iron dry cotton and cupboard dry easy care)

• Condensation efficiency (corrected with fi- nal humidity) during cupboard dry cotton cycle with nominal and half load

All the cycles have to be checked in accord- ance with EN 61121 (Tumble dryers for household use – Methods for measuring the performance).

Installation

Important! The appliance must be moved in vertical position for transport.

Appliance positioning

It is recommended that, for your conven- ience, the machine is positioned close to your washing machine.

The tumble dryer must be installed in a clean place, where dirt does not build up.

Air must be able to circulate freely all round the appliance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine.

To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.

Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.

The feet must never be removed. Do not restrict the floor clearance through deep- pile carpets, strips of wood or similar. This might cause heat built-up which would in- terfere with the operation of the appliance.

Important! The appliance must not be installed behind the lockable door, a sliding door a door with a hinge on the opposite side to that of the appliance.

Removing transport safety packaging

Caution!

Before use all parts of the transport packag- ing must be removed.

1.Open loading door

2.Pull off adhesive strips from inside ma- chine on top of drum.

Important!

The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The ap- pliance must therefore not be installed on floors which are not resistant to high temper- atures.

When operating the tumble dryer, the room temperature must not be lower than +5°C and higher than +35°C, as it may affect the performance of the appliance.

Important! Should the appliance be moved, it must be transported vertically.

3.Remove foil hose and polystyrene pad- ding from the machine.

Image 24
Contents Iron Aid EDI97170WElectrolux. Thinking of you Contents Important safety informationInstallation UseChild safety EnvironmentOld appliance Packaging materialProduct description What is shown in the display Control panelBefore first use Sorting and preparing laundry Starting up for the first timeSorting laundry Special notes about Iron AidIron AidTM Steam System Fill water tankWater recirculation system Overview of Iron Aid programmesCotton Synthetics Refresh Select steam level Load LoadStarting an Iron AidTM programme Selecting additional functionsDrying Changing a programmeIron Aid programme complete / removing laundry Overview of drying programmesAdditional Starting a drying programme DrynessRemoving laundry or loading laundry when necessary Drying rackDrying cycle complete / removing laundry Cleaning and maintenance Cleaning lint filtersCleaning the water recirculation valve/ filter Clean the door sealEmptying the condensed water container Cleaning heat exchanger Cleaning the drum Clean control panel and housingTroubleshooting by yourself What to do ifAfter a IronAid pro Technical data Changing the bulb for interior lightingMachine settings Consumption valuesInstallation Removing transport safety packagingHints for test institutes Appliance positioningDrying rack unpacking Electrical connectionFor easiest unpacking turn the rack upside down Service GB IE Guarantee/Customer ServiceSpecial accessories Great Britain & Ireland Standard guarantee conditionsEuropean Guarantee Service and Spare PartsExclusions 0870 5 929136906520-01-04082008