Electrolux EDI97170W user manual Machine settings, Consumption values

	electrolux 23
Weight when empty	approx. 46 kg
Loading volume (depends on programme)1)	max. 7 kg
Voltage	240V
Required fuse	13A
Total power	2350
Energy efficiency class	B
Energy consumption (7 kg of cotton, predrained	3,92
at 1000 rpm) 2)
Use	Domestic
Permissible ambient temperature	+ 5°C to + 35°C

Consumption values

The consumption values have been established under standard conditions. They may deviate when

the machine is operated in domestic circumstances.

Programme		Energy consumption in kWh
COTTON CUPBOARD DRY2)	4,0	(7 kg load pre-drained at 800 rpm)
	3,9	(7 kg load pre-drained at 1000 rpm)
	3,6	(7 kg load pre-drained at 1400 rpm)
COTTON IRON DRY2)	3.3	(7 kg load pre-drained at 1000 rpm)
SYNTHETICS CUPBOARD DRY2)	1,3	(7 kg load pre-drained at 1200 rpm)

1)Different loading volume data may be needed in some countries as a result of different measuring methods.

2)in accordance with EN 61121

Machine settings

Setting

BUZZER permanent off

Water hardness

Water contains, a variable quantity of limestone and min- eral salts of which quantities vary according to geographical locations thus varying its con- ductivity values.

Relevant variations of the con- ductivity of the water compared to those prefixed by the factory could slightly influence the re- sidual humidity of the laundry at the end of the cycle. Your dryer allows you to regulate the sen- sitivity of the drying sensor based on conductivity values of the water.

Implementation

1.Turn the programme selector to any programme.

2.Press simultaneously the DRYNESS and DELICATE buttons and hold down for approx. 5 seconds.

3.The buzzer is by default always off. You can use BUZZER button to activate or deactivate sound but machine does not memorize your selection.

1.Turn the programme selector to any programme.

2.Press simultaneously the DELICATE and START/PAUSE but- tons and hold down for approx. 5 seconds. The current setting is on the display:

– low conductivity <300 micro S/cm

– medium conductivity 300-600 micro S/cm

– high conductivity >600 micro S/cm

3.Press the START/PAUSE button sequentially until you set de- sired level.

4.To memorize setting press simultaneously the the DELICATE and START/PAUSE buttons or turn knob to O OFF position