Electrolux EDI97170W user manual Cleaning and maintenance, Cleaning lint filters

Page 17

Spread the garment out in the rack and roll it up, without squashing or folding it.

Place sport shoes on the rack.

Important! Take out the insoles and place them beside the shoes on the rack. Tie the shoelaces.

electrolux 17

4.Select the required programme run time, selectable with an interval of 10 min, from 30 min. up to 180 minutes.

Press the TIME button as many times as necessary until the required programme running time is shown in the display.

5.Press the START/PAUSE button. The programme is started.

6.At the end of the drying programme open the loading door and remove the gar- ments or shoes.

7.Turn the programme selector to O OFF.

8.Remove the rack from the drum at the end of drying.

Cleaning and maintenance

Cleaning lint filters

To ensure that the appliance works perfectly, the lint filters in the door and in front of the drum must be cleaned after every Iron AidTM or drying cycle.

Caution! Important. Never operate the

dryer without the lint filter or with a damaged or blocked lint filter.

1. Open loading door

2. Use a damp hand to clean the micro- fine filter, which is built into the lower part of the loading aperture.

Image 17
Contents EDI97170W Iron AidImportant safety information Electrolux. Thinking of you ContentsUse InstallationEnvironment Child safetyOld appliance Packaging materialProduct description Before first use What is shown in the displayControl panel Starting up for the first time Sorting and preparing laundrySorting laundry Special notes about Iron AidFill water tank Iron AidTM Steam SystemOverview of Iron Aid programmes Water recirculation systemCotton Synthetics Refresh Load Select steam level LoadSelecting additional functions Starting an Iron AidTM programmeChanging a programme DryingIron Aid programme complete / removing laundry Overview of drying programmesAdditional Dryness Starting a drying programmeDrying cycle complete / removing laundry Removing laundry or loading laundry when necessaryDrying rack Cleaning lint filters Cleaning and maintenanceEmptying the condensed water container Cleaning the water recirculation valve/ filterClean the door seal Cleaning heat exchanger Clean control panel and housing Cleaning the drumTroubleshooting by yourself What to do ifAfter a IronAid pro Changing the bulb for interior lighting Technical dataConsumption values Machine settingsRemoving transport safety packaging InstallationHints for test institutes Appliance positioningFor easiest unpacking turn the rack upside down Drying rack unpackingElectrical connection GB IE Guarantee/Customer Service ServiceSpecial accessories Great Britain & Ireland Standard guarantee conditionsService and Spare Parts European GuaranteeExclusions 0870 5 929136906520-01-04082008