Drying rack unpacking
Caution! Before use all packaging parts and rack must be removed from the drum
To unpack the rack:
1.Remove upper protection polystyrene parts by pulling them.
electrolux 25
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the rating plate. The rating plate is fitted near the loading aperture (see “Product description” chapter).
Connect the machine to an earthed socket, in accordance with current wiring regula- tions.
Warning! The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by an authorised serv- ice engineer or a qualified electri- cian. .
The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be used.
1 | 1 |
2.Lift slightly rack handle (not to the end).
For easiest unpacking turn the rack upside down
3.Take it carefully out of the drum.
3 | 2 |
4.Remove from the drum rest of packing elements.
4
3
12
The wires in the mains lead are coloured in accordance with the following code:
1Blue - Neutral
2cord clamp
3Brown - Live
4Green and Yellow - Earth
The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by the earth symbol 
or col- oured green and yellow.
The wire coloured blue must be connected to the terminal «N» or coloured black.
The wire coloured brown must be connected to the terminal marked «L» or coloured red.