Electrolux EDI97170W user manual Drying rack, Removing laundry or loading laundry when necessary

Page 16

16electrolux

Changing a programme

To change a programme which has been se- lected by mistake once the programme has started, first turn the programme selector to O OFF and then reset the programme.

The programme can no longer be changed directly once the programme has started. If you nevertheless attempt to change the programme with the pro- gramme knob or an additional function button (except the BUZZER button), the

START/PAUSE button and will flash in the multi-display. The drying pro- gramme is not however affected by this.

Removing laundry or loading laundry when necessary

Warning! Laundry and drumcan be- come hot. Risk of burns!

1.Open loading door

2.Load or remove laundry items.

3.Close the door securely. Lock must au- dibly lock.

4.Press the START/PAUSE button to con- tinue the drying cycle.

Drying cycle complete / removing laundry

Once the drying programme has finished, CREASE GUARD lights up in the display.

If the BUZZER is activated, an audible signal sounds at regular intervals.

The drying cycle is automatically fol- lowed by a anti-crease phase which lasts around 30 minutes.

The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. It can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming.)

1.Open door.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Cleaning and maintenance” section.)

3.Remove laundry.

4.Turn the programme knob to O OFF.

5.Important! After each drying cycle

Clean the micro-fine filter and fine filter

Drain the condensed water container (See section “Cleaning and mainte- nance”.)

6.Close door.

Drying rack

The drying rack offers the possibility of drying washable woollen fabrics and sports shoes. The drying rack does not turn with the clothes-dryer drum. This allows the drying of woollen garments or sports shoes.

When wet, the wool must be moved as little as possible because it tends to become mat- ted, so drying rack is a solution.

Sports shoes cannot be dried without the rack otherwise can damage the drum due to their weight.

For first unpacking of the rack please re- fer to the installation chapter.

Warning! Before installing the rack check the dryer drum. It must be empty!

1.Open the loading door.

2.Insert the rack.

Lift the rack horizontally in the drum. Guide the rack down until the support bracket at the front rests on the opening.

3. Place the washing on the rack:

Image 16
Contents Iron Aid EDI97170WElectrolux. Thinking of you Contents Important safety informationInstallation UseChild safety EnvironmentOld appliance Packaging materialProduct description Control panel What is shown in the displayBefore first use Sorting and preparing laundry Starting up for the first timeSorting laundry Special notes about Iron AidIron AidTM Steam System Fill water tankWater recirculation system Overview of Iron Aid programmesCotton Synthetics Refresh Select steam level Load LoadStarting an Iron AidTM programme Selecting additional functionsDrying Changing a programmeIron Aid programme complete / removing laundry Overview of drying programmesAdditional Starting a drying programme DrynessDrying rack Removing laundry or loading laundry when necessaryDrying cycle complete / removing laundry Cleaning and maintenance Cleaning lint filtersClean the door seal Cleaning the water recirculation valve/ filterEmptying the condensed water container Cleaning heat exchanger Cleaning the drum Clean control panel and housingTroubleshooting by yourself What to do ifAfter a IronAid pro Technical data Changing the bulb for interior lightingMachine settings Consumption valuesInstallation Removing transport safety packagingHints for test institutes Appliance positioningElectrical connection Drying rack unpackingFor easiest unpacking turn the rack upside down Service GB IE Guarantee/Customer ServiceSpecial accessories Great Britain & Ireland Standard guarantee conditionsEuropean Guarantee Service and Spare PartsExclusions 0870 5 929136906520-01-04082008