Electrolux EDI97170W user manual Installation, Use

Page 3

Items that have been soiled with substan- ces such as cooking oil acetone, petrol, kerosene, spot removers, turpentine, wax- es and wax removers should be washed in hot water with an extra amount of deter- gent before being dried in the tumble dry- er.

Danger of explosion: never tumble dry items that have been in contact with in- flammable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these substance are volatile, they could cause an explosion. Only tumble dry items washed with water.

Risk of fire: items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in the tumble dryer.

If you have washed your laundry with stain remover you must execute an extra rinse cycle before loading your tumble dryer.

Please make sure that no gas lighters or matches have accidentally been left in pockets of garments to be loaded into ap- pliance

When removing from the socket, never pull the mains plug by the cable, instead take a hold of the plug.

The height adjustable screw feet must never be removed.

Manifold plugs, couplings and extension cables must not be used. Risk of fire from overheating!

Do not spray down the appliance with jets of water. Risk of electric shock!

Do not lean on the open door. The appli- ance may tip over.

Once the drying cycle or Iron Aid pro- gramme has been interrupted, the laundry and drum may be hot. Risk of burns! Take care when removing the laundry.

Take care when interrupting the Iron Aid programme: Do not open the machine door during the steam phase. Hot steam may result in burns. The display shows a message to indicate the steam phase.

The final part of a drying cycle occurs with- out heat (cool down cycle) to ensure that the items are left at a temperature that en- sures that the items will not be damaged.

Caution – Hot surface:

Do not touch the back of the appliance while it is operating.

electrolux 3

Warning! Never stop a tumble dry before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. Risk of fire!

Risk of electric shock! Do not spray down the appliance with jets of water.

Installation

This appliance is heavy. Care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.

All packaging must be removed before use. Serious damage can occur to the product and to property if this is not ad- hered to. See relevant section in the user manual.

The final part of a tumble dryer cycle oc- curs without heat ( cool down cycle ) to ensure that the items are left at a temper- ature that ensures that items will not be damaged.

Any electrical work required to install this appliance should be carried out by a quali- fied electrician or competent person.

Care must be taken to ensure that the ap- pliance does not stand on the electrical supply cable.

If the machine is situated on a carpeted floor, please adjust the feet in order to al- low air to circulate freely under the appli- ance.

After having installed the appliance, check that it is not pressing or standing on its electrical supply cable.

If the tumble dryer is placed on top of a washing machine, it is compulsory to use the stacking kit (optional accessory).

Use

The appliance is intended for drying and steam treatment of standard laundry in do- mestic applications.

This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

Only dry fabrics which are designed to be machine dried. Follow the instructions on each garment label.

Do not dry unwashed items in the tumble dryer.

Image 3
Contents EDI97170W Iron AidImportant safety information Electrolux. Thinking of you ContentsUse InstallationPackaging material Child safetyEnvironment Old applianceProduct description What is shown in the display Control panelBefore first use Special notes about Iron Aid Sorting and preparing laundryStarting up for the first time Sorting laundryFill water tank Iron AidTM Steam SystemOverview of Iron Aid programmes Water recirculation systemCotton Synthetics Refresh Load Select steam level LoadSelecting additional functions Starting an Iron AidTM programmeOverview of drying programmes DryingChanging a programme Iron Aid programme complete / removing laundryAdditional Dryness Starting a drying programmeRemoving laundry or loading laundry when necessary Drying rackDrying cycle complete / removing laundry Cleaning lint filters Cleaning and maintenanceCleaning the water recirculation valve/ filter Clean the door sealEmptying the condensed water container Cleaning heat exchanger What to do if Cleaning the drumClean control panel and housing Troubleshooting by yourselfAfter a IronAid pro Changing the bulb for interior lighting Technical dataConsumption values Machine settingsAppliance positioning InstallationRemoving transport safety packaging Hints for test institutesDrying rack unpacking Electrical connectionFor easiest unpacking turn the rack upside down Great Britain & Ireland Standard guarantee conditions ServiceGB IE Guarantee/Customer Service Special accessories0870 5 929 European GuaranteeService and Spare Parts Exclusions136906520-01-04082008