Electrolux EDI97170W user manual Iron AidTM Steam System, Fill water tank

Page 8

8electrolux

2. Load your laundry (do not force it in/ over- load the machine).

Caution! Be careful not to trap laundry in between the loading door and rubber seal.

3. Close loading door securely. Lock must audibly lock.

Iron AidTM Steam System

Fill water tank

You must fill up the water tank before using an Iron Aid programme for the first time. Use the distilled water provided if there is not yet any condensed water from previous drying programmes (see chapter on "Cleaning and Maintenance, Emptying condensed water container"). If, after an Iron Aid programme is

selected, the water tank indicator on the display lights up, you will need to fill up the water tank with distilled water. Otherwise, you will not be able to start any Iron Aid pro- gramme.

1

2.Push down the water tank’s filler neck (1) and pull out it (2).

Caution! Important! Only fill the water tank with distilled or fully desalinated water. Do not use tap water or additives! You can also use the condensed water from the tank, as long as you filter it first (use the canister supplied with the filter fitted: see figure opposite).

1.Pull drawer containing condensed water container out a little (1),

1

3.Fill with distilled water from the canister provided, up to the MAX mark inside the container.

Image 8
Contents Iron Aid EDI97170WElectrolux. Thinking of you Contents Important safety informationInstallation UseChild safety EnvironmentOld appliance Packaging materialProduct description Before first use What is shown in the displayControl panel Sorting and preparing laundry Starting up for the first timeSorting laundry Special notes about Iron AidIron AidTM Steam System Fill water tankWater recirculation system Overview of Iron Aid programmesCotton Synthetics Refresh Select steam level Load LoadStarting an Iron AidTM programme Selecting additional functionsDrying Changing a programmeIron Aid programme complete / removing laundry Overview of drying programmesAdditional Starting a drying programme DrynessDrying cycle complete / removing laundry Removing laundry or loading laundry when necessaryDrying rack Cleaning and maintenance Cleaning lint filtersEmptying the condensed water container Cleaning the water recirculation valve/ filterClean the door seal Cleaning heat exchanger Cleaning the drum Clean control panel and housingTroubleshooting by yourself What to do ifAfter a IronAid pro Technical data Changing the bulb for interior lightingMachine settings Consumption valuesInstallation Removing transport safety packagingHints for test institutes Appliance positioningFor easiest unpacking turn the rack upside down Drying rack unpackingElectrical connection Service GB IE Guarantee/Customer ServiceSpecial accessories Great Britain & Ireland Standard guarantee conditionsEuropean Guarantee Service and Spare PartsExclusions 0870 5 929136906520-01-04082008