Alliance Laundry Systems DRY710C manual Safety Information

Page 6

Safety Information

13.Keep area around the exhaust opening and adjacent surrounding area free from the accumulation of lint, dust and dirt.

14.The interior of the dryer and the exhaust duct should be cleaned periodically by qualified service personnel.

15.If not installed, operated and maintained in accordance with the manufacturer’s instructions or if there is damage to or mishandling of this product’s components, use of this product could expose you to substances in the fuel or from fuel combustion which can cause death or serious illness and which are known to the State of California to cause cancer, birth defects or other reproductive harm.

16.Dryer will not operate with the loading door open. DO NOT bypass the door safety switch by permitting the dryer to operate with the door open. The dryer will stop tumbling when the door is opened. Do not use the dryer if it does not stop tumbling when the door is opened or starts tumbling without pressing the START mechanism. Remove the dryer from use and call the service person.

17.Do not put articles soiled with vegetable or cooking oil in the dryer, as these oils may not be removed during washing. Due to the remaining oil, the fabric may catch on fire by itself.

18.To reduce the risk of fire, DO NOT put clothes which have traces of any flammable substances such as machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, or anything dry-cleaned at home with a dry- cleaning solvent in the dryer.

19.Use the dryer only for its intended purpose, drying clothes.

20.Always disconnect the electrical power to the dryer before attempting service. Disconnect the power cord by grasping the plug, not the cord.

21.If supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

22.Install this dryer according to the INSTALLATION INSTRUCTIONS. All connections for electrical power, grounding and gas supply must comply with local codes and be made by licensed personnel when required. Do not do it yourself unless you know how!

23.Remove laundry immediately after the dryer stops.

24.Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).

25.Do not tumble fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass.

26.ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

27.Never operate the dryer with any guards and/or panels removed.

28.DO NOT operate the dryer with missing or broken parts.

29.DO NOT bypass any safety devices.

30.Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

IMPORTANT: Solvent vapors from dry-cleaning machines create acids when drawn through the heater of the drying unit. These acids are corrosive to the dryer as well as to the laundry load being dried. Be sure make-up air is free of solvent vapors.

IMPORTANT: Have your dryer installed properly. Don’t do it yourself unless you know how!

NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the dryer.

Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions you do not understand.

4

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

513005

Image 6
Contents Clothes Dryer Page What to do if YOU Smell GAS Contents Safety Information Explanation of Safety MessagesImportant Safety Instructions Safety Information Installation DimensionsMetered Models Before You Start ToolsInstalling the Dryer Position and Level the DryerArea Description Free Standing/Alcove Closet Installation Connect Dryer Exhaust System ∙ Failure to exhaust dryer properly will void warranty Exhaust DirectionExhaust System Maximum length of 4 in .2 cm diameter rigid metal ductMulti-Dryer Installation Exhaust Requirements Roof No Screen or Cap Wall Cm Minimum Installation Duct Station Minimum Diameter Collector Duct Gas Dryer Only Connect Gas Supply PipeElectric Dryer Only Connect Electrical Plug Grounding InformationWire Length Typical Receptacle Connecting Power Cord with Three-Wire Plug SHUT-OFF BOXConnecting Power Cord with Four-Wire Plug D695I Reinstall nine screws removed in Step Reverse Door, if DesiredElectric Dryer Wipe Out Inside of DryerPlug In the Dryer Gas DryerPlug cord into separately fused Electric Dryers Recheck StepsCheck Heat Source Gas DryersVending Meter CaseAdditional Dryer Security Operation Instructions Clean Lint FilterOperation Load LaundryInsert Coins or Card Set Fabric SelectorTo Insert Card To Insert MoneyIndicator Lights Start DryerMaintenance LubricationCare of Your Dryer Lint Filter Motor Overload ProtectorFor Energy Conservation Troubleshooting Dryer Symptom Possible Cause/Solution Dryer won’t startContact Information Alliance Laundry Systems Shepard Street Box Ripon, WIPage Installer Checklist Fast Track for Installing the Dryer