ADC AD-170SE installation manual SPECIFICATIONS/COMPONENT Identification, Specifications

SECTION II

SPECIFICATIONS/COMPONENT IDENTIFICATION

A. SPECIFICATIONS

MAXIMUM CAPACITY (DRY WEIGHT)				170 lb			77.11 kg
TUMBLER DIAMETER				51-1/2”		130.81 cm
TUMBLER DEPTH				42-1/2”		107.95 cm
TUMBLER VOLUME				51.20 cu ft		1,449.82 L
TUMBLER/DRIVE MOTOR				1 hp			0.75 kW
BLOWER/FAN MOTOR				7-1/2 hp			5.59 kW
DOOR OPENING (DIAMETER)				31-3/8”			79.69 cm
DOOR SILL HEIGHT				33-3/8”			84.77 cm
WATER CONNECTION				3/4”-11.5 NH		(North America)
				3/4” B.S.P.T. (Outside North America)
DRYERS PER 20’/40’ CONTAINER					3 / 7
DRYERS PER 48’/53’ TRUCK					8 / 9
	VOLTAGE AVAILABLE			208-575V	3ø	3,4w	50/60 Hz
	APPROXIMATE NET WEIGHT			2,103 lb		953.90 kg
	APPROXIMATE SHIPPING WEIGHT			2,269 lb		1,029.20 kg
Gas	AIRFLOW		60 Hz	3,700 cfm		104.77 cmm
			50 Hz	3,083 cfm		87.30 cmm
	HEAT INPUT			550,000 Btu/hr		138,598 kcal/hr
	EXHAUST CONNECTION (DIAMETER)			18”			45.72 cm
	COMPRESSED AIR CONNECTION			1/4” Quick Connection
	COMPRESSED AIR VOLUME			4.25 cfh			0.12 cmh
	INLET PIPE CONNECTION			1-1/2” F.N.P.T.
				1-1/2” B.S.P.T. (CE and Australia Only)
	VOLTAGE AVAILABLE			416-460V	3ø	3,4w	50/60 Hz
Electric	APPROXIMATE NET WEIGHT			2,103 lb		953.90 kg
	APPROXIMATE SHIPPING WEIGHT			2,269 lb		1,029.20 kg
	AIRFLOW		60 Hz	3,700 cfm		104.77 cmm
			50 Hz	3,083 cfm		87.30 cmm
	EXHAUST CONNECTION (DIAMETER)			18”			45.72 cm
	COMPRESSED AIR CONNECTION			1/4” Quick Connection
	COMPRESSED AIR VOLUME			4.25 cfh			0.12 cmh
		OVEN SIZE
	kW	Btu/hr	kcal/hr
	126	429,900	108,300
	VOLTAGE AVAILABLE			208-575V	3ø	3,4w	50/60 Hz
	APPROXIMATE NET WEIGHT			2,259 lb		1,024.67 kg
	APPROXIMATE SHIPPING WEIGHT			2,425 lb		1,099.96 kg
Steam	AIRFLOW		60 Hz	4,400 cfm		124.59 cmm
			50 Hz	3,666 cfm		103.80 cmm
	STEAM CONSUMPTION			725 lb/hr		328.85 kg/hr
	OPERATING STEAM PRESSURE			125 psi max			8.62 bar
	EXHAUST CONNECTION (DIAMETER)			20”			50.80 cm
	COMPRESSED AIR CONNECTION			1/4” Quick Connection
	COMPRESSED AIR VOLUME			4.25 cfh			0.12 cmh
	BOILER HORSEPOWER (NORMAL LOAD)			19 Bhp
	SUPPLY CONNECTION			1-1/2” F.N.P.T.
	RETURN CONNECTION			1-1/2” F.N.P.T.
Shaded areas are stated in metric equivalents							5/26/06

IMPORTANT: Gas dryers and steam dryers must be provided with a clean, dry, and regulated 80 psi

± 10 psi (5.51 bar ± 0.68 bar) air supply.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

6