IMPORTANT: There is no regulator provided in an liquid propane (L.P.) dryer. The water column (W.C.) pressure must be regulated at the source (L.P. tank) or an external regulator must be added to each dryer.
b.Steam Models
1)Check to insure that the steam damper is functioning properly.
a)The steam damper should not "slam" (open or closed) when it reaches the end of (piston) travel. Additionally, the steam damper should not bind and/or stop during travel. If either of these conditions occur, the flow control must be adjusted. Refer to the bottom illustration on page 33 for air adjustment instructions.
6.Make a complete operational check of ALL safety related circuits (i.e., lint drawer switch, and sail switch on gas models).
NOTE: To check for proper sail switch operation, open the main door and while holding main door switch plunger in, start the dryer. The dryer should start but the heat circuit should not be activated (on). If the heat (burner) does activate, shut the dryer off and make the necessary adjustments.
7.A reversing basket (tumbler) dryer should never be operated with less than a 100 lbs (45.35 kg) load (dry weight). The size of the load will affect the coast down and dwell (stop) times. The basket (tumbler) must come to a complete stop before starting in the opposite direction.
a.Microprocessor Controller (Computer) Dryer Models
1)Spin and stop are not adjustable in the Automatic Mode and have been preprogrammed into the microprocessor controller (computer) for
2)Spin and stop times are adjustable in the Manual (timed) Mode.
b.Dual Timer Dryer Models
1)Both spin time and stop (dwell) time are adjustable (refer to the illustration on page 46).
BASKET COATING
The basket (tumbler) is treated with a protective coating. We suggest dampening old garments or cloth material with a solution of water and nonflammable mild detergent and tumbling them in the basket (tumbler) to remove this coating.
36