American Dryer Corp ML-75DII SPECIFICATIONS/COMPONENT Identification, Specifications

SECTION II

SPECIFICATIONS/COMPONENT IDENTIFICATION

A. SPECIFICATIONS

BASKET (TUMBLER) DIAMETER			37”	94 cm
BASKET (TUMBLER) DEPTH			36”	91.5 cm
BASKET (TUMBLER) MOTOR			1 HP*	0.746 kw
DOOR OPENING (DIAMETER)			31-3/8”	79.7 cm
BASKET (TUMBLER) VOLUME			22.4 cu. ft.	0.634 cu. m.
DRYERS PER 20’/40’ CONTAINER			10/20
DRYERS PER 45’/48’ TRUCK			24/24
	VOLTAGE AVAILABLE		120-460v 1ø-3ø 50/60 Hz
	APPROX. WEIGHT (UNCRATED)		721 lbs.	327 kg
Gas
	APPROX. WEIGHT (CRATED)		771 lbs.	349.7 kg
	HEAT INPUT		200,000 btu/hr	50,400 kcal/hr
	AIRFLOW		1,200 cfm	33.98 cmm
	INLET PIPE SIZE		3/4” N.P.T.**
Electric	VOLTAGE AVAILABLE		208-460v 1ø-3ø	50/60 Hz
	APPROX. WEIGHT (UNCRATED)		721 lbs.	327 kg
	APPROX. WEIGHT (CRATED)		771 lbs.	349.7 kg
	AIRFLOW		1,200 cfm	33.98 cmm
	VOLTAGE AVAILABLE		120-460v 1ø-3ø 50/60 Hz
	APPROX. WEIGHT (UNCRATED)		757 lbs.	343.4 kg
	APPROX. WEIGHT (CRATED)		807 lbs.	366.1 kg
Steam	AIRFLOW		1,350 cfm	38.23 cmm
	COMPRESSED AIR VOLUME		BOILER HP NORMAL	0.02 cmh
			0.75 cfh
	AIR CONNECTION		1/8” F.P.T.
	STEAM CONSUMPTION		LOAD
	238.7 lbs./hr	108.3 kg/hr	7
	OPERATING STEAM PRESSURE		STEAM SUPPLY	STEAM RETURN
	125 PSI max	8.6 bars	1” F.P.T.	1” F.P.T.

Shaded areas are stated in metric equivalents

*For non-reversing models.

**A minimum of 3/4-inch pipe must be supplied to the gas inlet for each dryer.

IMPORTANT: Steam dryers must be provided with clean, dry, and regulated 80 PSI +/- 10 PSI (5.51 bars +/- 0.69 bars) air supply.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

6