Maytag W10240878A quick start To unlock, Wrinkle Prevent Feature, Clean Lint Screen

time more (_

[ess time

[]

wrink[e prevent

Moisture sensing strips in the dryer measure the amount of moisture in the clothes. The estimated time display may adjust to show a more accurate drying time.

WRINKLE PREVENT Feature

When you are unable to remove a load of clothes from the dryer as soon as it stops, wrinkles can form. The WRINKLE PREVENT feature

periodically tumbles, rearranges, and fluffs the load to help keep wrinkles from forming.

[] Get up to 60 minutes of heat-flee, periodic tumbling at the end of a cycle. Press the WRINKLE PREVENT button to turn ON or OFF at any time before the cycle has ended.

[] The WRINKLE PREVENT feature is preset to "OFF." if selected for other cycles, the WRINKLE PREVENT feature setting will remain "ON" the next time that cycle is selected.

Cycle Signal

The Cycle Signal produces an audible sound when the drying cycle is finished. Press the CYCI_E SIGNAl. button to turn On or Off at any time before the cycle has ended.

NOTE: When the WRINKI_E PREVENT feature is selected and

the Cycle Signal is on, an audible sound will be emitted every 20 minutes until the clothes are removed, or the WRINKI.E PREVENT feature is finished.

This feature allows you to lock your settings to avoid unintended use of the dryer. YOU can also use the I_ock/Unlock Controls feature to avoid unintended cycle or option changes during dryer operation.

To enable the Lock/Unlock Controls feature when dryer is running:

Press and hold the CYCI_E SIGNAl. button for 3 seconds.

The control is locked when a single beep is heard and the I.ocWUnlock Controls status light is on.

To enable the Lock/Unlock Controls feature when dryer is OFF:

When the dryer is off, it is not necessary to press the

POWER/CANCEl. button before activating the I.ocWUniock Controls feature.

To unlock:

Press and hold the CYCI.E SIGNAl. button for 3 seconds to turn this

feature off.

NOTE: When the dryer is running and Lock/Unlock control is on,

the dryer can be stopped by pressing the START/PAUSE button, but cannot be restarted until the control is unlocked.

YOu can change Auto Cycles, Timed Cycles, and the drying temperature on Timed Cycles at any time before pressing Start/ Pause.

[] Three short tones sound if an unavailable combination is selected. The last selection will not be accepted.

Changlng Cycles after starting dryer

1.Press the POWER/CANCEl. button. This ends the current cycle and turns the dryer OFF.

2.Press the POWER/CANCEl. button again to turn on the dryer.

3.Select the desired cycle and options.

4.Press and hold START/PAUSE. The dryer starts at the beginning of the new cycle.

Changlng settings on Timed Cycles during the cycle

YOU can change the temperature setting at any time during the cycle by pressing the TEMPERATURES button.

Follow the progress of your dryer with the drying Status indicator lights.

Wet

The Wet light illuminates at the beginning of an Auto Cycles if a wet item is detected.

Damp

The Damp light illuminates in an Auto Cycle when the laundry is

approximately 80% dry.

Cool Down

The Cool Down light illuminates during the cool down part of the cycle. I.aundry cools for ease in handling.

Done

The Done light illuminates when the drying cycle is finished. This indicator stays on during Wrinkle Prevent

Wrinkle Prevent

The Wrinkle Prevent light illuminates when this option is selected. This indicator stays on during the Wrinkle Prevent setting.

Clean Lint Screen

The Clean [.int Screen light is a reminder to check and clean the lint screen. The Clean I_int Screen light will come on when the machine is turned on. The light will flash until the cycle is started or the door is opened, and then the light will turn off.