Gas Supply Requirements, Gas Type | Maytag W10057352A guide

Maytag W10057352A manual Gas Supply Requirements, Gas Type, Gas supply line

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 13" (33 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Gas Type

Natural gas:

This dryer is equipped for use with Natural gas. It is design-certified by CSA International for LP (propane or butane) gases with appropriate conversion.

Your dryer must have the correct burner for the type of gas in your home. Burner information is located on the rating plate in the door well of your dryer. If this information does not agree with the type of gas available, contact your dealer or call the phone numbers referenced in the “Assistance or Service” section.

LP gas conversion:

Conversion must be made by a qualified technician.

No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting your gas company.

Gas supply line

Must include 1/8" NPT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas connection to the dryer. See illustration.

1/2” IPS pipe is recommended.

3/8” approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.

If you are using Natural gas, do not use copper tubing.

Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting.

If your dryer has been converted to use LP gas, 3/8” LP compatible copper tubing can be used. If the total length of the supply line is more than 20 ft (6.1 m), use larger pipe.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape.

Must include a shutoff valve:

In the U.S.A.:

An individual manual shutoff valve must be installed within six (6) feet (1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1. The location should be easy to reach for opening and closing.

In Canada:

An individual manual shutoff valve must be installed in accordance with the B149.1, Natural Gas and Propane Installation Code. It is recommended that an individual manual shutoff valve be installed within six (6) feet (1.8 m)

of the dryer.

The location should be easy to reach for opening and closing.

AC E

A. 3/8” flexible gas connector

B. 3/8” pipe to flare adapter fitting

C. 1/8” NPT minimum plugged tapping

D. ½" NPT gas supply line

E. Gas shutoff valve

Gas supply connection requirements

Use an elbow and a 3/8” flare x 3/8” NPT adapter fitting between the flexible gas connector and the dryer gas pipe, as needed to avoid kinking.

Use only pipe-joint compound. Do not use TEFLON®† tape.

This dryer must be connected to the gas supply line with a listed flexible gas connector that complies with the standard for connectors for gas appliances, ANSI Z21.24 or CSA 6.10.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

W10057352A specifications

The Maytag W10057352A is a highly regarded appliance designed to enhance the efficiency and functionality of modern kitchens. This product is primarily recognized as a durable and reliable power source for numerous kitchen tasks, embodying the brand’s commitment to quality and performance.

One of the standout features of the Maytag W10057352A is its robust construction. Built with heavy-duty materials, it is engineered to withstand the rigors of daily use, ensuring longevity and continued performance over time. This appliance is designed for those who value reliability in their kitchen equipment.

The W10057352A incorporates advanced technology that sets it apart in the market. It features a powerful motor that delivers exceptional performance, making it ideal for a variety of tasks from mixing to mashing. The device is equipped with variable speed settings, allowing users to easily adjust the speed based on their specific cooking needs. This level of control enhances user experience, ensuring that they can achieve the desired consistency and texture in their culinary creations.

In terms of ease of use, the Maytag W10057352A is designed with user-friendly controls that simplify operation. Its ergonomic handle ensures a comfortable grip, and the intuitive buttons provide quick access to the various functions. Moreover, the appliance is easy to clean, with many components designed for convenient disassembly and dishwasher-safe features. This aspect is particularly appealing to busy individuals who seek low-maintenance solutions in their kitchen.

Another key characteristic of the W10057352A is its versatility. It is compatible with a range of attachments and accessories, allowing users to customize the appliance according to their cooking requirements. Whether users are whipping, kneading, or blending, the Maytag W10057352A offers flexibility to tackle a myriad of recipes.

Energy efficiency is also an integral part of the design philosophy behind the Maytag W10057352A. The appliance operates efficiently, minimizing energy consumption without compromising performance. This focus on energy efficiency not only benefits users’ utility bills but also aligns with environmentally conscious practices.

Overall, the Maytag W10057352A stands out as a powerful, efficient, and versatile appliance that embodies the brand's dedication to quality. Its robust construction, advanced technology, user-friendly features, and adaptability make it a valuable addition to any kitchen. Whether for a budding home cook or a seasoned chef, the Maytag W10057352A is poised to meet and exceed culinary expectations.