Cycles and options may vary by model.
minutes to reduce wrinkling. If the load is not removed from the dryer and Extended Wrinkle Out On has been selected, the cycle will advance to WRINKLE OUT which provides additional unheated tumbling time. (See Step 2).
Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use with Air Fluff, Low, Medium or Regular temperature settings. For timed drying, turn the control dial clock- wise until the pointer points to the proper time setting in the Time Dry/Air Fluff cycle.
NOTE: Using the Air Fluff temperature setting will require a longer drying time.
Special Options
Damp Dry is located on the Time Dry/Air Fluff section of the dial. It is designed to partially dry items and can be used with any temperature selection. Damp Dry will provide 20 minutes of tumbling time, followed by 5 minutes of
Wrinkle Release will release wrinkles from items that are clean and dry but only slightly wrinkled, such as from a crowded closet or suitcase, or from sitting in the dryer too long after the cycle has ended. Wrinkle Release provides 10 minutes of tumbling followed by five minutes of
Step 4
Push the Control
Dial in to Start
Push the control dial in to start the dryer. The dryer door must be closed for the dryer to start.
NOTE: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a specific rate during the IntelliDry cycles. At first the dial may not advance at all. Toward the end of the cycle (when the load begins to dry), the dial will advance at a more regular rate and much more quick- ly. This is normal operation.
4