Humminbird NS 10 manual Zooming in and OUT

Page 22

The “top down view” is the default setting, and allows you to see your course history line, which is where you have been. Remember that north is always shown at the top of the map, so the course indicator arrow is important to see the direction you are traveling. As your position changes, the map will scroll by, so your position is always shown near the center of the map.

The “forward-looking view” is the equivalent of turning the map so the direction you are traveling is at the top for the display. A course projection line helps to visualize the direction of travel. The “forward-looking view” is especially helpful when following a route, or navigating a channel. You simply turn the boat to align the projected course line with your destination or the next point in your route. The map will rotate and scroll to give an accurate “moving map” of your route.

Note: The maximum range in the forward looking view is 22 NM, 25 SM, or 40 KM.

Note: You cannot change to the forward looking view while in the cursor or pick mode.

ZOOMING IN AND OUT

Pressing ZMIN or ZMOUT will control the range of the map.

Pressing ZM IN will reduce the range of the map. Pressing ZM OUT will increase the range. Note the range indicator in the lower left part of the graphics area. When ZM IN is pressed, a box is shown in the graphics area to indicate the size of the new range. (Figure 18) Figure 19 shows zoom from a “forward-looking” position. Due to the complexity of the maps, it may take several seconds for the NS 10 to “re-draw” the map after using zoom. There are nine zoom ranges available.

Image 22
Contents Page NS 10 Operations Manual HOW the NS 10 WorksWhat Comes in the BOX Choosing a Mounting Location for the ReceiverChoosing a Mounting Location for the Control Head Deck Mount Mounting the ReceiverStem Mount Page Installing the Control Head Gimbal Bracket MountOptional Flush Mount Basic Functions Getting StartedNS 10 Screen Display Connections to the NS Page Turning the NS 10 on and OFF Page Page Using the Select System Page Page Page Page Display Contrast LIGHT, TEXT, MAP, Clear and Help Buttons Changing Your ViewZooming in and OUT Cursor To Determine the Distance and Bearing From Present Position Creating Temporary WaypointsHighlighting a Waypoint Using Pick Page Creating Temporary Routes Using GO to Steering Information Advanced Functions of the NS Creating Permanent WaypointsPage Page Page Page Page Waypoint Listing Page Entering a New Route Page Existing Routes Page Delete Waypoints To Travel or Clear a Route Page Route Listing Page Alarm Settings Page All Clear Datalog Screen System Status Page Additional User Set-Up Options Page Page Page Simulator and Map Preview Page Page Page Page Page Using the NS10 in an Emergency Maintenance Troubleshooting Humminbird One Year Full Warranty Service PolicyROM SpecificationsRAM NS 10 Interface Options AccessoriesNmea Glossary DgpsALL Clear Display Contrast Clock ModeDISTANCE/SPEED Land Mass HeadingLAT/LON Gridlines Plotter History Nmea Interface OutputPosition Update Averaging HDOP49 PDOP49 VDOP49