Humminbird NS 10 manual

Page 47

The ARRIVAL alarm sounds when you are within the specified distance of an interim or destination waypoint while travelling a route.

Press ENTER when the selection is correct. The ARRIVAL menu will be displayed.

Use the up/down arrows to choose the range from your destination that the alarm will sound. You may choose .1, 25, .5, or 1.0 in the units that you chose when you set-up your NS 10. Notice that the ARRIVAL alarm cannot be turned off.

Note: In a multiple waypoint route if you press CLEAR when the ARRIVAL alarm is activated it will cause the route to switch to the next waypoint This must be done while in the ARRIVAL alarm circle (refer to section V. Real World Applications).

Press ENTER when the setting is correct. This will return you to the ALARM menu.

Use the up/down arrows to select your next parameter for adjustment. Continue as before until you have made all necessary adjustments.

If your adjustments are complete press SELECT to return to the MAIN MENU. Press SELECT a second time to exit the Select System and return to the map. Or you may press MAP, at any time while in the Select System, to return directly to the map display.

The following adjustment menus are available in your ALARM menu.

The OFF COURSE alarm warns you of having drifted some distance from the desired route of travel.

Use the up/down arrows to choose the off course range that the alarm will sound: .1, .25, .5, and

1.0(in the units you chose when you set up your NS 10) or you may turn the OFF COURSE alarm off.

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Page HOW the NS 10 Works NS 10 Operations ManualChoosing a Mounting Location for the Receiver What Comes in the BOXChoosing a Mounting Location for the Control Head Stem Mount Mounting the ReceiverDeck Mount Page Gimbal Bracket Mount Installing the Control HeadBasic Functions Getting Started Optional Flush MountNS 10 Screen Display Connections to the NS Page Turning the NS 10 on and OFF Page Page Using the Select System Page Page Page Page Display Contrast Changing Your View LIGHT, TEXT, MAP, Clear and Help ButtonsZooming in and OUT Cursor Creating Temporary Waypoints To Determine the Distance and Bearing From Present PositionHighlighting a Waypoint Using Pick Page Creating Temporary Routes Using GO to Steering Information Creating Permanent Waypoints Advanced Functions of the NSPage Page Page Page Page Waypoint Listing Page Entering a New Route Page Existing Routes Page Delete Waypoints To Travel or Clear a Route Page Route Listing Page Alarm Settings Page All Clear Datalog Screen System Status Page Additional User Set-Up Options Page Page Page Simulator and Map Preview Page Page Page Page Page Using the NS10 in an Emergency Maintenance Troubleshooting Service Policy Humminbird One Year Full WarrantyRAM SpecificationsROM Nmea AccessoriesNS 10 Interface Options ALL Clear DgpsGlossary DISTANCE/SPEED Clock ModeDisplay Contrast LAT/LON Gridlines HeadingLand Mass Position Nmea Interface OutputPlotter History Update Averaging HDOP49 PDOP49 VDOP49
Top Page Image Contents