Humminbird NS 10 manual Steering Information

Page 28

Note: The course history line is not displayed when the PICK mode is on, but it is being recorded and will be displayed when the mode is turned off.

STEERING INFORMATION

In this section you will learn how to obtain information about:

-Course bearing

-Waypoint bearing

-Cross track error

-Distance to the next waypoint

-Time to the next waypoint

The ROUTE mode must be active in order to obtain steering information.

Define a route to travel either by using GO TO (Refer to section111. Creating temporary routes using GO TO) or the Select System (Refer to section 1V. “To Travel or Clear a Route”)

Press STEER. The steering indicator will appear in the multi-function display box.

The display will provide information on your present course vs your intended course with instruction for getting back on course and other navigation information helpful to your trip (Refer to Figure 24). The digital course read-out moves to the bottom of the display box, so that it may always be visible. The Off Course Alarm setting is shown by arrows at the top of the steering information box.

Note: STEER will only work if the ROUTE mode is active.

If your boat is traveling in a direction more than 90 degrees from the course bearing to the waypoint, a warning message will appear in the graphic display area stating HEADING AWAY FROM WAYPOINT. As with any alarm or warning message, press CLEAR to remove the message from the screen.

Note: To discontinue the ROUTE mode, press and hold CLEAR.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Page NS 10 Operations Manual HOW the NS 10 WorksWhat Comes in the BOX Choosing a Mounting Location for the ReceiverChoosing a Mounting Location for the Control Head Deck Mount Mounting the ReceiverStem Mount Page Installing the Control Head Gimbal Bracket MountOptional Flush Mount Basic Functions Getting StartedNS 10 Screen Display Connections to the NS Page Turning the NS 10 on and OFF Page Page Using the Select System Page Page Page Page Display Contrast LIGHT, TEXT, MAP, Clear and Help Buttons Changing Your ViewZooming in and OUT Cursor To Determine the Distance and Bearing From Present Position Creating Temporary Waypoints Highlighting a Waypoint Using Pick Page Creating Temporary Routes Using GO to Steering Information Advanced Functions of the NS Creating Permanent WaypointsPage Page Page Page Page Waypoint Listing Page Entering a New Route Page Existing Routes Page Delete Waypoints To Travel or Clear a Route Page Route Listing Page Alarm Settings Page All Clear Datalog Screen System Status Page Additional User Set-Up Options Page Page Page Simulator and Map Preview Page Page Page Page Page Using the NS10 in an Emergency Maintenance Troubleshooting Humminbird One Year Full Warranty Service PolicyROM SpecificationsRAM NS 10 Interface Options AccessoriesNmea Glossary DgpsALL Clear Display Contrast Clock ModeDISTANCE/SPEED Land Mass HeadingLAT/LON Gridlines Plotter History Nmea Interface OutputPosition Update Averaging HDOP49 PDOP49 VDOP49
Top Page Image Contents