Humminbird NS 10 manual Datalog Screen

Page 49

Use the up/down arrows to choose YES or NO.

Press ENTER when the setting is correct.

Press SELECT to return to ALL CLEAR menu, pressing SELECT again will exit to the MAIN MENU, pressing SELECT a third time will exit the Select System and return to the map. Or you may press MAP, at any time while in the Select System, to return directly to the map display.

Note: When you are finished clearing your NS 10, it will be necessary to use the USER SET-UP menu to customize the NS 10 for your application. (Refer to section III. "System Options'

Note: Depressing the CLEAR key for three seconds will clear all temporary waypoints and routes, but it will not clear permanent waypoints and routes.

Datalog Screen

The Datalog screen displays information on your current status in large digits so that it may be viewed better from a distance. This information includes the elapsed distance and time, and average speed from the time you turn the NS 10 on, or it may be reset at anytime. Additional information displayed in large digits includes: Latitude, longitude, course, speed and time.

Press SELECT to retrieve the MAIN MENU.

Use the up/down arrows to highlight SYSTEM OPTIONS.

Press ENTER when the setting is correct. The SYSTEM OPTIONS menu will be displayed.

Image 49

Contents Page HOW the NS 10 Works NS 10 Operations ManualChoosing a Mounting Location for the Receiver What Comes in the BOXChoosing a Mounting Location for the Control Head Deck Mount Mounting the ReceiverStem Mount Page Gimbal Bracket Mount Installing the Control HeadBasic Functions Getting Started Optional Flush MountNS 10 Screen Display Connections to the NS Page Turning the NS 10 on and OFF Page Page Using the Select System Page Page Page Page Display Contrast Changing Your View LIGHT, TEXT, MAP, Clear and Help ButtonsZooming in and OUT Cursor Creating Temporary Waypoints To Determine the Distance and Bearing From Present PositionHighlighting a Waypoint Using Pick Page Creating Temporary Routes Using GO to Steering Information Creating Permanent Waypoints Advanced Functions of the NSPage Page Page Page Page Waypoint Listing Page Entering a New Route Page Existing Routes Page Delete Waypoints To Travel or Clear a Route Page Route Listing Page Alarm Settings Page All Clear Datalog Screen System Status Page Additional User Set-Up Options Page Page Page Simulator and Map Preview Page Page Page Page Page Using the NS10 in an Emergency Maintenance Troubleshooting Service Policy Humminbird One Year Full WarrantyROM SpecificationsRAM NS 10 Interface Options AccessoriesNmea Glossary DgpsALL Clear Display Contrast Clock ModeDISTANCE/SPEED Land Mass HeadingLAT/LON Gridlines Plotter History Nmea Interface OutputPosition Update Averaging HDOP49 PDOP49 VDOP49