Humminbird NS 10 manual Alarm Settings

Page 46

Press ' once, and you will notice a DIST mode indicator appearing in the lower part of the graphics area.

Press DIST, again to define the point you want to know the distance to.

Note: If you use PICK to identify the first point for the DIST function, then you must continue using only PICK.

Note: DIST is a mode so pressing CLEAR will cancel it at any time.

Alarm Settings

There are three alarms that you may set on your NS 10. An an arrival alarm, off course alarm and an anchor alarm.

ARRIVAL: This alarm will sound when you are within the specified range of your destination, or interim waypoint. It will only sound while you are traveling a temporary or permanent route.

OFF COURSE: This alarm will only sound if you are traveling a temporary or permanent route.

ANCHOR: This alarm will sound when you leave the specified range of the anchor position.

When an alarm is activated an audible warning will be heard accompanied by an on screen message. Press CLEAR to acknowledge the warning and reset the alarm.

Press SELECT to enter the MAIN MENU.

Use the up/down arrows to highlight ALARM.

Press ENTER when the setting is correct. The ALARM menu will be displayed.

Use the up/down arrows to highlight ARRIVAL.

Image 46

Contents Page NS 10 Operations Manual HOW the NS 10 WorksWhat Comes in the BOX Choosing a Mounting Location for the ReceiverChoosing a Mounting Location for the Control Head Deck Mount Mounting the ReceiverStem Mount Page Installing the Control Head Gimbal Bracket MountOptional Flush Mount Basic Functions Getting StartedNS 10 Screen Display Connections to the NS Page Turning the NS 10 on and OFF Page Page Using the Select System Page Page Page Page Display Contrast LIGHT, TEXT, MAP, Clear and Help Buttons Changing Your ViewZooming in and OUT Cursor To Determine the Distance and Bearing From Present Position Creating Temporary WaypointsHighlighting a Waypoint Using Pick Page Creating Temporary Routes Using GO to Steering Information Advanced Functions of the NS Creating Permanent WaypointsPage Page Page Page Page Waypoint Listing Page Entering a New Route Page Existing Routes Page Delete Waypoints To Travel or Clear a Route Page Route Listing Page Alarm Settings Page All Clear Datalog Screen System Status Page Additional User Set-Up Options Page Page Page Simulator and Map Preview Page Page Page Page Page Using the NS10 in an Emergency Maintenance Troubleshooting Humminbird One Year Full Warranty Service PolicyROM SpecificationsRAM NS 10 Interface Options AccessoriesNmea Glossary DgpsALL Clear Display Contrast Clock ModeDISTANCE/SPEED Land Mass HeadingLAT/LON Gridlines Plotter History Nmea Interface OutputPosition Update Averaging HDOP49 PDOP49 VDOP49