Furuno NAVpilot-500 manual Setting the speed alarm, How to use XTE alarm Into mode

Page 55

5. ALARMS

3.Rotate the [ENTER] knob to select “OFF”, “OUT” or “INTO” as appropriate. OFF: Turn the XTE alarm off.

OUT: The alarm is released when exceeding the XTE range is exceeded.

INTO: The alarm is released when the course error is within the XTE range. For OUT or INTO, set the range (0.001 to 9.999 nm/km/sm) using the [ENTER] knob.

4.Press the [ENTER] knob.

How to use XTE alarm (INTO mode)

When your boat is cruising parallel to an object or area you want to avoid, for example, a reef, sandbar, etc., use the XTE alarm (INTO) to alert you when your boat is within a certain distance to the object or area.

1.On the FURUNO plotter, create a route which runs parallel to the area you wish to avoid.

2.Set the XTE alarm (INTO) range such that it is the distance to the edge of the area plus some allowance.

When your boat nears the area by the distance set above the XTE alarm sounds to alert you.

XTE alarm range

Own boat

Route made at the plotter

Application of XTE alarm

5.1.6Setting the speed alarm

The speed alarm warns when your boat’s speed is within, outside, over or under the speed range set.

1.Rotate the [ENTER] knob to select “SPEED ALARM” from the ALARM menu.

2.Press the [ENTER] knob to show the speed alarm options window.

OFF

UNDER

OVER

INSIDE

OUT OF RANGE

Speed alarm options window

5-4

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Autopilot Safety Instructions Table of Contents Iii AlarmsForeword FeaturesWord to the Owner of the NAVpilot-500 System configuration of NAVpilot-500 System ConfigurationThis page is intentionally left blank Principle of Autopilot Principle of the AutopilotPrinciple of Operation Operating Controls Basic OperationControl unit, front view Turning On/Off Turning the power offStartup sequence Displays Adjusting Brilliance and ContrastDisplays Contrast, brilliance windowNormal Display Screen setup menuSelecting the data shown on Normal and Data Displays Selecting data for Normal Display 2 screenDisplayed data Data available for display in Screen 2 Upper and LowerSelecting data for Data Display Selecting the display layout for Data DisplayData Displays Screen 3 pattern options windowGraphic options window Selecting the display on Graphic DisplayGraphic displays Display setup menu Selecting data for analog indicatorNormal Display 1 Rudder Angle Analog indicator bar options windowThis page is intentionally left blank Stby mode display Stby ModeSteering Modes Using the Auto mode Auto ModeAuto mode display Advanced auto options window Advanced Auto modeAdvanced Auto mode display Enabling the Advanced Auto modeTurn setting window Turn mode For Auto modeTurn Starting the NAV mode NAV ModeNAV mode display Nav mode options window Selecting sailing method of NAV modeNAV mode, Course and XTE Waypoint switching options window Switching waypointNAV mode menu OFF Fishing mode options windowDo not use the Orbit mode in rough sea Orbit modeOrbit Navigating to TLL point Fishing modeFishing mode window Clover LeafDial type remote controller FAP-5551 Remote ModeRotating dial Turning power off dial typeNFU No Follow-Up mode display Turning power on, button and lever type remote controllersTurning power off, button and lever type remote controllers Operating remote controller ex. button and lever typesStby mode menu Selecting course after the Remote mode is offSystem setup menu Cse course after remote options window Course after remote controller is turned offDodging in Stby mode Dodge ModeDodge mode display Dodging in Auto or NAV mode Data calibration menu Stby Mode MenuOffsetting data Menu OperationMagnetic variation options window Offsetting the heading dataShip’s speed, temperature, depth calibration Selecting the selecting method of magnetic variationSea state options window Setting parametersParameter setup menu Selecting the method of entering the parameterDeviation level options window MANUAL-CALMExample of Manual parameter Setting parameters manuallyRudder Gain Track line and weather setting valueRudder angle and rudder gain setting WeatherGeneral guidelines for setting counter rudder gain General guidelines for setting rudder gainCounter Rudder Auto trim options window Adjusting the sensitivity in monitoring the boat’s trimAuto net towing options window When towing the netSpeed unit options window, for example Setting the units of measurementsDDMM.MM’ Activating key beep Setting other menu itemsKey beep options window Selecting language Setting the panel dimmerLocking the control unit Lock options windowRunning simulation program Simulation mode options windowAlarm Menu AlarmsAlarm menu Selecting the beep pattern Selecting the alarm buzzerAudio alarm options window Alarm interval options windowWatch alarm options window Setting the watch alarmSetting the heading deviation alarm Setting the cross-track error limitSpeed alarm options window Setting the speed alarmHow to use XTE alarm Into mode Application of XTE alarmDepth alarm options window Setting the depth alarmLog trip options window Setting the temperature alarmSetting the trip distance alarm Temp alarm options windowClearing the trip distance Alarm InformationLog trip clear options window Alarm messages, their meanings and priorities Alarm messagesCheck point Remedy Maintenance & TroubleshootingPreventive Maintenance Maintenance programTest options window Replacement of FuseDiagnostics Parts Name Type Code No RemarksController Unit Test Processor Unit TestHeading Sensor Test Screen Test Keyboard TestRudder test Rudder Setup and Auto TestMemory clear options window Clearing MemoriesSystem Data System data screenError messages Error MessagesError message Meaning Remedy Error messages con’t MN-1 Menu TreeMN-2 Stby mode menuMN-3 Auto mode menuInterface NAVpilot-500Control Unit Processor UnitEnvironmental Conditions Power SupplyColor IN-1 Index
Related manuals
Manual 73 pages 25.32 Kb

NAVpilot-500 specifications

The Furuno NAVpilot-500 is an advanced autopilot system designed for a range of vessels, from small boats to larger commercial ships. This cutting-edge technology provides reliable steering assistance, ensuring enhanced navigational safety and improved operational efficiency. With its versatile functionalities, the NAVpilot-500 has made a significant impact in the maritime industry.

One of the standout features of the Furuno NAVpilot-500 is its use of FURUNO's proprietary technology, including advanced sensors and algorithms. This system leverages a dual-processor architecture, allowing for seamless performance in diverse sea conditions. The NAVpilot-500 is capable of handling course control with impressive precision, adjusting automatically to wind and waves to maintain a steady course.

Another notable aspect of this autopilot system is the intuitive user interface. The large, sunlight-readable display provides easy access to all functionalities and settings, making it user-friendly for operators of varying expertise levels. The touchscreen interface allows for straightforward navigation through menus, ensuring that users can quickly adapt to changing conditions on the water.

The NAVpilot-500 features a comprehensive set of integration options, including compatibility with various types of navigation and communication equipment. This capability allows for effective integration with Furuno's proprietary chart plotters and radar systems, ultimately enhancing situational awareness and safety while navigating.

Moreover, the system offers customizable autopilot modes, including modes for auto and standby operation. This versatility allows users to choose the most suitable steering method for their specific needs, whether for leisurely cruising or during heavy-duty fishing operations. The NAVpilot-500 also incorporates advanced safety features, such as target tracking and collision avoidance, ensuring that operators remain vigilant and prepared for any potential hazards.

Furuno's NAVpilot-500 is engineered for durability and reliability, meeting the rigorous standards set by the maritime industry. Robust construction allows it to withstand harsh marine environments, providing peace of mind to operators. With its blend of advanced technology, user-friendly design, and reliable performance, the NAVpilot-500 stands out as one of the leading autopilot systems in the market today. Whether for leisure or professional use, this system brings a level of sophistication and safety that enhances navigation experiences across various maritime applications.
Top Page Image Contents