Furuno NAVpilot-500 manual Control Unit, Processor Unit, Interface

Page 71

 

 

SPECIFICATIONS OF AUTOPILOT

 

 

NAVpilot-500

1

CONTROL UNIT

 

1.1

Display

Monochrome LCD, 83 (W) x 83 (H) mm, 160x160 dots

1.2

Backlight

Adjustable in 8 steps

1.3

Contrast

16 steps

1.4

Useable Set

6 sets

2

PROCESSOR UNIT

2.1

Rudder Mode

Manual, Auto, Dodge, Remote, Advanced Auto*, Navigation*

2.2

Weather Adjustment

AUTO/SEMI-AUTO/CALM/MODERATE/ROUGH

2.3

Rudder Angle Ratio

AUTO/0-9

2.4Rudder Angle Equivalent AUTO/0-9

2.5

Rudder Angle Settings

45° max.

2.6

Alarm

Bearing deviation, Out of course*, Watch, Ship’s speed*,

 

 

Water temperature*

 

 

*: Navigation data required

3

INTERFACE

 

 

3.1

Ports

Navigation data in/out (NMEA): 1, Output (NMEA): 1

 

 

 

Input (NMEA): 1, I/O for Heading Sensor (NMEA): 1

 

3.2

Input Sentences

IEC 61162-2,

 

 

 

NMEA 0183 1.5/2.0/3.0

 

 

Command Bearing

APA, APB, BOD/XTE, RMB

 

 

Ship’s Location (L/L)

GGA, RMC, RMA, GLL, GNS

 

 

Ship’s Location (LOP)

GLC, GTD, RMA

 

 

SOG/COG

VTG, RMC, RMA

 

 

STW

VHW

 

 

Heading (HDG)

HDT, HDG, HDM

 

 

Destination

RMB, WPL

 

 

Bearing/distance

RMB, BWC, BWR

 

 

Time

RMC, ZDA

 

 

Arrival Alarm

AAM, RMB

 

 

Cross Track Error

APB, XTE, RMB

 

 

Water Depth

DPT, DBT

 

 

Water Temperature

MTW

 

 

Wind Speed/Bearing

VPW, MWD, MWV

 

3.3

Output Sentences

IEC 61162-2, NMEA 0183 1.5/2.0/3.0

 

 

 

AAM, ALR, ASD, BWC, BWR, DBT, DPT, GGA, GLC, GLL, GTD,

 

 

GNS, HDG, HDT, HSC, MTW, MWV, RMA, RMB, RMC, RSA, VBW,

 

 

VHW, VTG, WPL, XTE, ZDA

 

 

 

SP - 1

E7250S01A

Image 71
Contents Autopilot Safety Instructions Table of Contents Iii AlarmsWord to the Owner of the NAVpilot-500 FeaturesForeword System configuration of NAVpilot-500 System ConfigurationThis page is intentionally left blank Principle of Autopilot Principle of the AutopilotPrinciple of Operation Control unit, front view Basic OperationOperating Controls Startup sequence Turning the power offTurning On/Off Displays Adjusting Brilliance and ContrastDisplays Contrast, brilliance windowNormal Display Screen setup menuSelecting the data shown on Normal and Data Displays Selecting data for Normal Display 2 screenDisplayed data Data available for display in Screen 2 Upper and LowerSelecting data for Data Display Selecting the display layout for Data DisplayData Displays Screen 3 pattern options windowGraphic displays Selecting the display on Graphic DisplayGraphic options window Normal Display 1 Selecting data for analog indicatorDisplay setup menu Rudder Angle Analog indicator bar options windowThis page is intentionally left blank Steering Modes Stby ModeStby mode display Auto mode display Auto ModeUsing the Auto mode Advanced auto options window Advanced Auto modeAdvanced Auto mode display Enabling the Advanced Auto modeTurn Turn mode For Auto modeTurn setting window NAV mode display NAV ModeStarting the NAV mode NAV mode, Course and XTE Selecting sailing method of NAV modeNav mode options window NAV mode menu Switching waypointWaypoint switching options window OFF Fishing mode options windowDo not use the Orbit mode in rough sea Orbit modeOrbit Navigating to TLL point Fishing modeFishing mode window Clover LeafDial type remote controller FAP-5551 Remote ModeRotating dial Turning power off dial typeNFU No Follow-Up mode display Turning power on, button and lever type remote controllersTurning power off, button and lever type remote controllers Operating remote controller ex. button and lever typesSystem setup menu Selecting course after the Remote mode is offStby mode menu Cse course after remote options window Course after remote controller is turned offDodge mode display Dodge ModeDodging in Stby mode Dodging in Auto or NAV mode Data calibration menu Stby Mode MenuOffsetting data Menu OperationMagnetic variation options window Offsetting the heading dataShip’s speed, temperature, depth calibration Selecting the selecting method of magnetic variationSea state options window Setting parametersParameter setup menu Selecting the method of entering the parameterDeviation level options window MANUAL-CALMExample of Manual parameter Setting parameters manuallyRudder Gain Track line and weather setting valueRudder angle and rudder gain setting WeatherCounter Rudder General guidelines for setting rudder gainGeneral guidelines for setting counter rudder gain Auto trim options window Adjusting the sensitivity in monitoring the boat’s trimAuto net towing options window When towing the netSpeed unit options window, for example Setting the units of measurementsDDMM.MM’ Key beep options window Setting other menu itemsActivating key beep Selecting language Setting the panel dimmerLocking the control unit Lock options windowRunning simulation program Simulation mode options windowAlarm menu AlarmsAlarm Menu Selecting the beep pattern Selecting the alarm buzzerAudio alarm options window Alarm interval options windowWatch alarm options window Setting the watch alarmSetting the heading deviation alarm Setting the cross-track error limitSpeed alarm options window Setting the speed alarmHow to use XTE alarm Into mode Application of XTE alarmDepth alarm options window Setting the depth alarmLog trip options window Setting the temperature alarmSetting the trip distance alarm Temp alarm options windowLog trip clear options window Alarm InformationClearing the trip distance Alarm messages, their meanings and priorities Alarm messagesCheck point Remedy Maintenance & TroubleshootingPreventive Maintenance Maintenance programTest options window Replacement of FuseDiagnostics Parts Name Type Code No RemarksHeading Sensor Test Processor Unit TestController Unit Test Screen Test Keyboard TestRudder test Rudder Setup and Auto TestMemory clear options window Clearing MemoriesSystem Data System data screenError message Meaning Remedy Error MessagesError messages Error messages con’t MN-1 Menu TreeMN-2 Stby mode menuMN-3 Auto mode menuInterface NAVpilot-500Control Unit Processor UnitColor Power SupplyEnvironmental Conditions IN-1 Index
Related manuals
Manual 73 pages 25.32 Kb

NAVpilot-500 specifications

The Furuno NAVpilot-500 is an advanced autopilot system designed for a range of vessels, from small boats to larger commercial ships. This cutting-edge technology provides reliable steering assistance, ensuring enhanced navigational safety and improved operational efficiency. With its versatile functionalities, the NAVpilot-500 has made a significant impact in the maritime industry.

One of the standout features of the Furuno NAVpilot-500 is its use of FURUNO's proprietary technology, including advanced sensors and algorithms. This system leverages a dual-processor architecture, allowing for seamless performance in diverse sea conditions. The NAVpilot-500 is capable of handling course control with impressive precision, adjusting automatically to wind and waves to maintain a steady course.

Another notable aspect of this autopilot system is the intuitive user interface. The large, sunlight-readable display provides easy access to all functionalities and settings, making it user-friendly for operators of varying expertise levels. The touchscreen interface allows for straightforward navigation through menus, ensuring that users can quickly adapt to changing conditions on the water.

The NAVpilot-500 features a comprehensive set of integration options, including compatibility with various types of navigation and communication equipment. This capability allows for effective integration with Furuno's proprietary chart plotters and radar systems, ultimately enhancing situational awareness and safety while navigating.

Moreover, the system offers customizable autopilot modes, including modes for auto and standby operation. This versatility allows users to choose the most suitable steering method for their specific needs, whether for leisurely cruising or during heavy-duty fishing operations. The NAVpilot-500 also incorporates advanced safety features, such as target tracking and collision avoidance, ensuring that operators remain vigilant and prepared for any potential hazards.

Furuno's NAVpilot-500 is engineered for durability and reliability, meeting the rigorous standards set by the maritime industry. Robust construction allows it to withstand harsh marine environments, providing peace of mind to operators. With its blend of advanced technology, user-friendly design, and reliable performance, the NAVpilot-500 stands out as one of the leading autopilot systems in the market today. Whether for leisure or professional use, this system brings a level of sophistication and safety that enhances navigation experiences across various maritime applications.