Emerson 788 DVC manual General Considerations as Applied to the DL8000

D E C 2012 DANIELTM MODEL 788DVC DIGITAL CONTROL VALVES

EQUIPMENT DAMAGE

It is recommended that the external pump control be turned to the OFF position when performing any electrical wiring installation and until initial control valve adjustments are made in the DL8000.

Failure to comply with these procedures could result in damage to the equipment and compromise in the integrity of the operation.

5.Flush the line of any and all contaminates.

6.Bleed as much air as possible from the system before start up.

4.2General Considerations as Applied to the DL8000

Upon completion of the preliminary installation of the Digital Control Valve a Start-up Adjustment Procedure must be administered. Reference “DL8000 Preset Controller Instruction Manual”, P/N D301244X012.

4-2 INSTALLATION AND MAINTENANCE