Emerson 788 DVC manual

Page 7

Notice

THE CONTENTS OF THIS PUBLICATION ARE PRESENTED FOR INFORMATIONAL PURPOSES ONLY, AND W HILE EVERY EFFORT H AS BEEN MADE TO ENSURE THEIR ACCURACY, THEY ARE NOT TO BE CONSTRUED AS W ARRANTIES OR GUARANTEES, EXPRESSED OR IMPLIED, REGARDING THE PRODUCTS OR SERVICES DESCRIBED HEREIN OR THEIR USE OR APPLICABILITY. ALL SALES ARE GOVERNED BY DANIEL’S TERMS AND CONDITIONS, W HICH ARE AVAILABLE UPON REQUEST. W E RESERVE THE RIGHT TO MODIFY OR IMPROVE THE DESIGNS OR SPECIFICATIONS OF SUCH PRODUCTS AT ANY TIME.

DANIEL DOES NOT ASSUME RESPONSIBILITY FOR THE SELECTION, USE OR MAINTENANCE OF ANY PRODUCT. RESPONSIBILITY FOR PROPER SELECTION, USE AND M AINTENANCE OF ANY DANIEL PRODUCT REMAINS SOLELY W ITH THE PURCHASER AND END -USER.

TO THE BEST OF DANIEL’S KNOW LEDGE THE INFORMATION HEREIN IS COMPLETE AND ACCURATE. DANIEL MAKES NO W ARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED W ARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE W ITH RESPECT TO THIS MANUAL AND, IN NO EVENT, SHALL DANIEL BE LIABLE FOR ANY INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PRODUCTION, LOSS OF PROFITS, LOSS OF REVENUE OR USE AND COSTS INCURRED INCLUDING W ITHOUT LIMITATION FOR CAPITAL, FUEL AND POW ER, AND CLAIMS OF THIRD PARTIES.

PRODUCT NAMES USED HEREIN ARE FOR MANUFACTURER OR SUPPLIER IDENTIFICATION ONLY AND MAY BE TRADEM ARKS/REGISTERED TRADEM ARKS OF THESE COMPANIES.

DANIEL AND THE DANIEL LOGO ARE REGISTERED TRADEMARKS OF DANIEL INDUSTRIES, INC. THE EMERSON LOGO IS A TRADEMARK AND SERVICE MARK OF EMERSON ELECTRIC CO.

COPYRIGHT © 2012

BY DANIEL MEASUREMENT AND CONTROL, INC.

HOUSTON, TEXAS, U.S.A.

All rights reserved. No part of this work may be reproduced or copied in any form or by any means - graphic, electronic or mechanical - without first receiving the written permission of Daniel Measurement and Control, Inc., Houston, Texas, U.S.A.

Image 7
Contents DanielTM Model 788 DVC digital control valves This page intentionally left blank Important safety instructions Product operation personnel Safety alert symbol Safety signal words and symbolsThis page intentionally left blank Page Warranty and limitation of liability Introduction Tables FiguresAggressive Products Danieltm Model 788DVC Digital Control Valves IntroductionEquipment Damage Principle of OperationOperational Sequence Closed Position Open Control Position Open Position no control Maximum Safe Working Pressure Do not exceed specifications listed belowSafe Working Temperature Ranges Pressure ClassValve Capacity ConnectionsFlow vs. Pressure Drop See Figure Flow vs Pressure Loss Main Valve Cylinder Pressure/Temperature RatingsMaterials of Construction Main Valve Body Cylinder HeadTubing Astm A352 LCC WCB Dimensions Valve Size 150# Ansi 300# Ansi No Indicator With Indicator Recommended Installation Instructions General Considerations as Applied to the DL8000 Use equipment for its intended purpose Personal Injury or Death AND/OR Property DamageTypical Application Top Loading Typical Application Bottom Loading Control Valve Configuration new for DL8000 Cylinder Assembly Removal All Daniel Valves Cylinder Disassembly Recommended Low Flow Set-point Cylinder Reassembly Retrofit Cup-seal Replacement on Existing AP Option PistonOption Assembly Danieltm Model 788DVC Digital Control Valves Personal Injury AND/OR Equipment Damage Danieltm Model 788DVC Digital Control Valves Troubleshooting Condition Probable Cause Correction Danieltm Model 788DVC Digital Control Valves Parts List Parts List 2, 3, 4, 6, 8 Sizes Recommended Spare Parts Valve Cylinder Assembly Infectious Radioactive Explosive Pyrophoric Poison Gas Decontamination/Cleaning Fluids ProcessShipping Requirements Page W .em erson.com