Schneider Electric VW3 A3 303 user manual Configuration

Page 17

6. Configuration

bControl in Drivecom profile via Modbus and reference switching at the terminals

The command comes from Modbus.

The command comes either from Modbus or from the terminals. Input LI5 at the terminals is used to switch the reference between Modbus and the terminals.

The command is in Drivecom profile.

Configure the following parameters:

Parameter	Value	Comment
Profile	Separate Drivecom profile	The run commands follow the Drivecom profile, and the command and
		reference can come from different channels.

Reference 1 configuration	Network card	Reference 1 comes from Modbus.

Reference 1B configuration	Analog input 1 on the terminals	Reference 1B comes from input AI1 on the terminals.

Reference switching	Input LI5	Input LI5 switches the reference (1 ↔1B).

Command 1 configuration	Network card	Command 1 comes from Modbus.

Command switching	Channel 1	Channel 1 is the command channel.

Note: Reference 1B is directly connected to the drive reference limit. If switching is performed, the functions that affect the reference (summing, PID, etc) are inhibited.

Configuration via the graphic display terminal or the integrated display terminal:

	Menu		Parameter	Value
	[1.6	- COMMAND] (CtL-)	[Profile] (CHCF)	[Separate] (SEP)

			[Ref.1 channel] (Fr1)	[Com. card] (nEt)

			[Cmd channel 1] (Cd1)	[Com. card] (nEt)

			[Cmd switching] (CCS)	[ch1 active] (Cd1)

	[1.7	APPLICATION FUNCT.] (FUn-)	[Ref.1B channel] (Fr1b)	[Ref. AI1] (AI1)
	[REFERENCE SWITCH.]
	[REFERENCE SWITCH.]		[Ref 1B switching] (rCb)	[LI5] (LI5)
			[Ref 1B switching] (rCb)	[LI5] (LI5)

17

Image 17

Contents Altivar Contents Electric shock will result in death or serious injury Before you beginDocumentation structure Installation ManualProgramming Manual Communication Parameters ManualNotation IntroductionPresentation Installing the card in the drive Hardware setupReceipt Hardware descriptionCoding the address Switch codingChoosing polarization 1234 AddressModbus RS485 standard Connecting to the busWiring recommendations Connection cables Connection via RJ45 wiring systemConnection accessories Type of master Master interface Description Catalog number Connection cables for the masterTWD XCA RJ030 TSX SCP CMDescription Catalog Number Subscriber socket Connection via junction boxesRS485 double shielded twisted pair CablesTSX P ACC TSX CSA500Communication parameters ConfigurationControl via Modbus in I/O profile Control CommandControl via Modbus or the terminals in I/O profile Parameter Value CommentControl via Modbus or the terminals in Drivecom profile Control via Modbus in Drivecom profileConfiguration Communication scanner Example of configuration via the graphic display terminalRDY NET COM. Scanner InputCOM. Fault Management Communication faultsMonitored parameters CONFIG. COMM. MAPFormat Format Range Terminal displayChecking the address DiagnosticsLEDs Green RUN Red ERR Meaning Corrective actionCommunication MAP RUN NETCOM. Scanner Input MAP COM Scan Output MAP CMD. Word ImageCOM Scan Output MAP Input variable Scanner parameterOutput variable Scanner parameter Card fault Communication faultSlave Slave j Slave k Modbus protocolPrinciple Ascii mode RTU modeModes Slave address Function code DataCode Modbus name Description Broadcast Size of data Modbus functions availableRead Holding/Input Registers 3/4 Write Single Register Diagnostics Write Multiple Registers 16 = 16#10 Get Comm Event Counter 11 = 16#0BRead/Write Multiple Registers 23 = 16#17 Machine Read Device Identification 43 = 16#2BMEI Example of positive responseCode Modbus name Description Size of data Output variables Logic address Default assignmentInput variables Logic address Default assignment Parameter Logic Input variable address Logic address Default valueParameter Logic Read Parameter assigned Output controlInput monitoring Value Parameter assignedResponse Code Error codeException responses Logic address Parameter Value Read non-existent or protected parametersRS485 standard AppendixMaster Modbus 2-wire standard schematicModbus 4-wire standard schematic Uni-Telway schematic Type of trunk cable Cable with 1 shielded twisted pair Wire Jbus schematicRecommendations Creating a Modbus bus using non-standard equipmentDifferent scenarios Example Calculating the polarizationCard connector pinout RS485 schematic for the cardContact no. Signal SUB-DAtv71ModbusJbusENV1 2005-05