Furuno SC-120 manual Processor Unit, rear view

2. INSTALLATION

The reference direction is as shown below. The mounting method is the same as that for mounting on the deck.

Reference Direction

Mount processor unit so reference direction is within ±2.5° of fore-and-aft line.

POWER switch			Connectors
(power lamp)
		Processor Unit, rear view
Bow				Bow
	Mounting Method: Invert
	Mounting Direction: A
Port	Starboard			Port

Stern	DIRECTION "A"
	Stern

Bow	Bow
	Mounting Method: Invert
	Mounting Direction: C

Port Starboard Port

DIRECTION "C"

Stern Stern

Name plate (other side)

Mounting Method: Invert

Mounting Direction: B

Starboard

DIRECTION "B"

Mounting Method: Invert

Mounting Direction: D

Starboard

DIRECTION "D"

Processor unit orientation, installation on the underside of a desk

Mount the processor unit on a level surface with its name plate facing the bow, stern, port or starboard.

2-13