Furuno SC-120 manual Geodetic data, System Setup menu

3. OPERATION

3.9System Setup

3.9.1Geodetic data

Your unit is preprogrammed to recognize most of the major chart systems of the world. Although the WGS-84 system (default setting) is the GPS standard, other categories of charts in other datum still exist. Match the GPS datum with the chart system.

1.Press the [MENU] key to open the menu.

2.Choose SYS SETUP and press the [ENT] key.

SYSTEM SETUP

DATUM	:	WGS84
UNITS	: kt
TIME DIFF	: +00:00
TIME DISP	: 24 HOUR
TEST?
DEMO	: OFF

EXCHANGE BATTERY?

SYSTEM SETUP menu

3.Confirm that the cursor is selecting DATUM and press the [ENT] key.

4.Choose WGS84 (GPS standard), WGS72 or OTHER according to the nautical chart you use and press the [ENT] key.

5.If you chose WGS72 or WGS84, press the [DISP] key to finish. For OTHER, go to step 6.

6 Press the [ENT] key.

7.Use the Omnipad to enter chart number, referring to the geodetic chart list on page A-2. Choose location with ◄ or ►; change value with ▲ or ▼.

8.Press the [ENT] key.

9.Press the [DISP] key to close the menu.

3-11