York YK-ZCU4x0-0, YKSMU2x0-0, YK-ZCU2x0-0 user manual Setup Procedures, Setup Options Menu Structure

428516-YUM-B-0908

Setup Procedures

Setup procedures include:

•Setting date and time parameters

•Changing the administrator or operator password

•Enabling/disabling the password requirement and remote user interface

•Setting up the modem

•Specifying Ethernet settings

•Selecting display units

•Calibrating the touch screen

•Specifying system manager name, zone coordinator name, and job name

Figure 11 is a flowchart of the Setup menu structure for the System Manager and Zone Coordinator. These menu selections are described in the sections that follow.

Setup

Change

Operator

Password

	System
		Zone
Change
	Manager	Coordinator
Administrator		(See following Note.)
Password

Enable/Disable

Security (Password)

Enable/Disable			Calibrate Touch
Remote User
				Screen
Interface	Security	Display
• Daylight Savings Time	(password)	Setup	•	Display Units
• Current Date			• Language
• Current Time	Time	Modem
• Time Zone	Management	Setup	• Allow Incoming Connections
• Time Display			• Baud Rate
• DHCP Enabled	Ethernet		•	Wait for Dial Tone Before Dialing
		System	•	Extra Initialization Commands
• Obtain DNS Address	Setup
		Manager/
Automatically
		Coordinator
• Ethernet MAC Address
		Name
• Computer Name
• Domain Name	Job Name
• IP Address
• IP Mask

• IP Router Address		Note: If you perform Zone Coordinator setup from a System Manager, some
•	1st DNS Server IP Address	selections are not available because they are under the control of the System
•	2nd DNS Server IP Address	Manager or are operations only done locally at the Coordinator. They include
		Time Management, Display Setup, Alarm Setup, Security (Password), and Job
		Name.

FIG:StupFlw

Figure 11: Setup Options - Menu Structure

System Manager/Zone Coordinator User’s Manual 25