Configuring Pager as Alarm Destination
To configure a pager as an alarm destination:
1.From the Home screen of the System Manager or Zone Coordinator, press the Alarm Summary icon. The Alarm Summary screen appears.
2.Press the Alarm Setup button. The Alarm Setup screen appears.
3.Press the Pager Destination button. The Pager Setup screen appears.
Pager Setup
Pager Phone Number: | Databits: | 7 |
|
Pager Service Access Number:
Parity: Even
Stop bits: | 1 |
|
Alarm Priority Required to Send | None | |
Message to Pager: | ||
| ||
Max Text Characters: | 0 |
FIG:PgrScrn
Figure 32: Pager Setup Screen
4.Press the button for the Pager parameter you want to change. The button label describes the current setting. When you press the button, the appropriate screen appears allowing you to change the value. Table 12 lists these parameters and their ranges or possible selections.
Table 12: Pager Setup Parameters (Part 1 of 2)
Parameter | Parameter Range/Selections | |
|
| |
Pager Phone Number | Enter a value up to 24 characters1 | |
Pager Service Access Number | Enter a value up to 24 characters1 | |
Alarm Priority Required to Send Message to Pager | Select one of these options: | |
| • Service, Service Priority and Critical | |
| • Service Priority and Critical | |
| • | Critical |
| • | None |
|
| |
Max Text Characters | ||
|
|
|
System Manager/Zone Coordinator User’s Manual | 49 |