5.Use the number keypad to specify a new password. Use any combination of 4 digits. Press the Clear button if you need to erase the digits and start over.
As you enter the password, asterisks appear in the New Password field.
6.To confirm, reenter the new password in the Confirm Password field.
7.Press OK to submit the new password. The Security/Password Setup screen returns.
Enabling (or Disabling) Password Security
To enable (or disable) password security:
Note: This function is only available at the System Manager (or Coordinator). You cannot perform this procedure from the remote user interface.
1.From the Home screen, press the Setup icon. The System Manager Setup or Coordinator Setup and Status screen appears.
2.For a System Manager, press the System Manager button. The System Manager Setup screen appears.
For a Coordinator, press the Coordinator button. The Coordinator Setup screen appears.
3.Press the Security (password) button. The Security/Password Setup screen appears.
4.Press the Security (Password) button. The Security (Password) screen appears.
Security (Password)
Curent Value:
Enabled
New Value:
Disabled
OK Cancel
Figure 14: Security (Password) Screen
FIG:PwdEna
28 | System Manager/Zone Coordinator User’s Manual |